Skroutz.eu

Kraft Single-phase Pump Well 1.33hp Automatic Operation 43529
Submersible Water Pumps

Kraft Single-phase Pump Well 1.33hp Automatic Operation 43529

Key features:

  • Maximum pump submersion: 12m
  • Performance: 6000 Lit/h
  • Outlet: 1’’
  • Power: 1000 W
  • Cable length: 10m
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    45

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
Product report

Description

Description

Automatic operation submersible well pump. Suitable for applications only in clean water. Also suitable for installation in narrow points. With built-in water flow sensor that automatically starts and stops the pump. With built-in water shortage sensor.

Features

  • Maximum pump submersion: 12m
  • Performance: 6000 Lit/h
  • Nozzle: 1’’
  • Power: 1000 W
  • Cable length: 10m
  • Voltage: 230/50 V/Hz
  • Max head: 45 m
  • Max particles: 1 mm
  • Packaging dimensions: 240 x 200 x 580 mm
  • Weight (N/G): 11.2 / 12.3 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
997.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Maximum Particle Size
1 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (54)

Reviews

4.6
54
4.6
Review this product
  1. 43
  2. 5
  3. 1
  4. 1
  5. 4
Review this product
  • VASILIS_Α
    3
    VASILIS_Α

    If it gets stuck by anything, the fuse blows first and then its thermal protection. Three have burned out in two years

    Translated from Greek ·
    2
  • kkotsak
    1
    kkotsak

    The worst pump ever. After one month of use, it lost its watertightness. Unsuitable product, and since I cut the cable because it cannot be connected to a socket in a humid area, I have obviously lost the warranty as well.

    Translated from Greek ·
    1
  • makis1969
    5
    makis1969

    Powerful with easy float adjustment. However, to avoid entanglement, I have wrapped it with mesh. Ideal for narrow pits where the float with cable gets stuck against the walls and doesn't rise. So far, everything is good. If something comes up, I will get back to it.

    Translated from Greek ·
    2
  • Lazaros.gwg
    5
    Lazaros.gwg

    Powerful pump with great absorption capacity. Light in weight but has a sturdy construction. It starts and stops its operation on its own depending on the water level as the built-in float takes the command. You can also start it manually with the press of a small lever. It doesn't consume much electricity and has a small size that fits comfortably even in small household pits. The length of the cable for the job I need it for is more than enough. I have installed it for pumping waste from a condensing boiler (condensates) and it has no issues as it absorbs without sticking, etc. I would prefer if it came with a hose in the package, even just 1-2 meters, so that it would be complete in all aspects. Overall, very satisfied with its use.

    Translated from Greek ·
    3
  • kalyvia80
    1
    kalyvia80

    Far and wide! It worked for a month and when I needed to use it again after 9 months, it started malfunctioning. The service replied that "the pump is for clean water and the customer is using it with mud." We simply forgot to mention that a 20-year-old pump in the same well was working perfectly, without any clogs!

    Translated from Greek ·
    2
  • See all

Description & Specifications

Automatic operation submersible well pump. Suitable for applications only in clean water. Also suitable for installation in narrow points. With built-in water flow sensor that automatically starts and stops the pump. With built-in water shortage sensor.

Features

  • Maximum pump submersion: 12m
  • Performance: 6000 Lit/h
  • Nozzle: 1’’
  • Power: 1000 W
  • Cable length: 10m
  • Voltage: 230/50 V/Hz
  • Max head: 45 m
  • Max particles: 1 mm
  • Packaging dimensions: 240 x 200 x 580 mm
  • Weight (N/G): 11.2 / 12.3 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
1.33 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
997.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
15 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
45 m

Maximum Head Height: 45


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Maximum Output
6 m³/h

Maximum Output

The maximum output or flow of a submersible water pump, as defined by the manufacturers, is the maximum amount of water the pump can move under ideal conditions, usually with zero head (i.e., no lift resistance).
Pump Submersion Depth
15 m
Maximum Particle Size
1 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (54)

4.6
54
4.6
Review this product
  1. 43
  2. 5
  3. 1
  4. 1
  5. 4
Review this product
  • VASILIS_Α
    3
    VASILIS_Α

    If it gets stuck by anything, the fuse blows first and then its thermal protection. Three have burned out in two years

    Translated from Greek ·
    2
  • kkotsak
    1
    kkotsak

    The worst pump ever. After one month of use, it lost its watertightness. Unsuitable product, and since I cut the cable because it cannot be connected to a socket in a humid area, I have obviously lost the warranty as well.

    Translated from Greek ·
    1
  • makis1969
    5
    makis1969

    Powerful with easy float adjustment. However, to avoid entanglement, I have wrapped it with mesh. Ideal for narrow pits where the float with cable gets stuck against the walls and doesn't rise. So far, everything is good. If something comes up, I will get back to it.

    Translated from Greek ·
    2
  • Lazaros.gwg
    5
    Lazaros.gwg

    Powerful pump with great absorption capacity. Light in weight but has a sturdy construction. It starts and stops its operation on its own depending on the water level as the built-in float takes the command. You can also start it manually with the press of a small lever. It doesn't consume much electricity and has a small size that fits comfortably even in small household pits. The length of the cable for the job I need it for is more than enough. I have installed it for pumping waste from a condensing boiler (condensates) and it has no issues as it absorbs without sticking, etc. I would prefer if it came with a hose in the package, even just 1-2 meters, so that it would be complete in all aspects. Overall, very satisfied with its use.

    Translated from Greek ·
    3
  • kalyvia80
    1
    kalyvia80

    Far and wide! It worked for a month and when I needed to use it again after 9 months, it started malfunctioning. The service replied that "the pump is for clean water and the customer is using it with mud." We simply forgot to mention that a 20-year-old pump in the same well was working perfectly, without any clogs!

    Translated from Greek ·
    2
  • See all
152,15 €
38,00 €   shipping cost