Skroutz.eu

Imperia MIG 201 Inverter MIG / MMA / FCAW / MAG Welding Machine with Maximum Welding Current of 200A and 16% Duty Cycle
Welding Machines

Imperia MIG 201 Inverter MIG / MMA / FCAW / MAG Welding Machine with Maximum Welding Current of 200A and 16% Duty Cycle

Key features:

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm
  • Weight: 12.8 Kg
See full description

Top specs

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    9.4

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all

Welding current (max)

  1. 160 A

    from 484,40 €

  2. 200 A

    from 581,00 €

581 00 €
Delivery Wed, 04 Nov - Fri, 06 Nov
38,00 €   shipping cost
Sent from Greece
From Emkate 4.9 (16)
4.9 (16 reviews)
Greece
2 pieces
See Tools on the page of Emkate

Learn more about invoicing
Product report

Description

Description

Capabilities

Inverter MMA / MIG welding machine from the manufacturer Imperia, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 1.6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 12.5kg.

Features

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm (coil 5 Kg)
  • Electrode: ∅ 4 mm (max.)
  • Weight: 12.8 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MIG, MMA, FCAW, MAG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
16 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (5)

Reviews

5.0
5
5.0
Review this product
  1. 5
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Machine durability
  • Construction quality
  • Easy to use
  • Value for money
  • Power
  • Volume
  • Welding cable length
  • Weight

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Sokratis_Siomos
    5
    Sokratis_Siomos

    Verified purchase

    This review is about the welding current (max): 160 A

    The best for welding. Easy to install and handle, a big plus is that it also does electric welding! Without gas, I can say that it doesn't do a good weld, but with gas, it welds great!

    Translated from Greek ·
    Did you find this review helpful?
  • dimitris_kokkinidis242
    5
    1 out of 1 members found this review helpful
    dimitris_kokkinidis242
    This review is about the welding current (max): 160 A

    I'm back with a new comment in a state of desperation about the work; I put it to work with a 3.1kw generator, 2.8 real from Lidl, and I ran it for about an hour on 1.4 millimeters of sturdy galvanized at low amps, and it went like a train, unstoppable, and the generator without a voltage stabilizer (AVR). I was amazed; for so many years I was afraid to try it for fear it would burn out from the currents, but it proved itself once again, my friend.

    Translated from Greek ·
    Did you find this review helpful?
  • kokkinidisdim
    5
    5 out of 6 members found this review helpful
    kokkinidisdim
    This review is about the welding current (max): 160 A

    I have had the 161pro mig since 2015 and I have worked with it a lot every day. The trigger of the clamp works instantly, while in some others it takes a slow 1 second to respond. It is very good, but the 200a is even better

    Translated from Greek ·
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
    • Power
    Did you find this review helpful?
  • nurretin.bbe
    5
    nurretin.bbe

    Verified purchase

    This review is about the welding current (max): 160 A

    • Power
    • Machine durability
    • Construction quality
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
    • Weight
  • 5
    George_Pol13

    Verified purchase

    • Power
    • Machine durability
    • Construction quality
    • Easy to use
    • Value for money
    • Weight
    • Volume
    • Welding cable length
  • Sokratis_Siomos
    5
    Sokratis_Siomos

    The best for welding. Easy to install and handle, a big plus is that it also does electric welding! Without gas, I can say that it doesn't do a good weld, but with gas, it welds great!

    Translated from Greek ·
    0
  • dimitris_kokkinidis242
    5
    dimitris_kokkinidis242

    I'm back with a new comment in a state of desperation about the work; I put it to work with a 3.1kw generator, 2.8 real from Lidl, and I ran it for about an hour on 1.4 millimeters of sturdy galvanized at low amps, and it went like a train, unstoppable, and the generator without a voltage stabilizer (AVR). I was amazed; for so many years I was afraid to try it for fear it would burn out from the currents, but it proved itself once again, my friend.

    Translated from Greek ·
    1
  • kokkinidisdim
    5
    kokkinidisdim

    I have had the 161pro mig since 2015 and I have worked with it a lot every day. The trigger of the clamp works instantly, while in some others it takes a slow 1 second to respond. It is very good, but the 200a is even better

    Translated from Greek ·
    5
  • nurretin.bbe
    5
    nurretin.bbe

    0
  • 5
    George_Pol13

    0
  • See all

Description & Specifications

Capabilities

Inverter MMA / MIG welding machine from the manufacturer Imperia, where inverter technology enhances the performance and durability of the machine and helps reduce its weight. The MMA electrode method creates thick and strong welds without the need for an external gas supply, making it ideal for welding outside the workshop. The MIG method requires the wire to have a special coating (flux) otherwise it needs to be connected to an external gas cylinder (e.g., argon, CO2). It can operate continuously for 1.6 minutes at 200A before needing to stop to cool down. Therefore, due to the maximum Amps it supports, it melts thicker wires more easily and creates thick welds with fewer passes. Its weight reaches 12.5kg.

Features

  • Type: MIG 201
  • Performance (EN 60974-1): 200 A (16%)
  • Power (MIG/MMA): 8 / 9.4 kVA
  • Adjustment (MIG): 15.5 V - 24 V
  • Wires: ∅ 0.6 - 0.8 - 1.0 mm (coil 5 Kg)
  • Electrode: ∅ 4 mm (max.)
  • Weight: 12.8 Kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MIG, MMA, FCAW, MAG

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
16 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
9.4 kVA

Power: 9.4


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
12500 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
Yes

for Generator with AVR


Suitable for generator with AVR voltage stabilizer.

Features

Hot Start
Yes

Hot Start


Temporarily increases the current intensity at the moment of welding initiation.
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (5)

5.0
5
5.0
Review this product
  1. 5
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Machine durability
  • Construction quality
  • Easy to use
  • Value for money
  • Power
  • Volume
  • Welding cable length
  • Weight

Reviews photos

Reviews photos
Reviews photos
Reviews photos

Reviews by our members

  • Sokratis_Siomos
    5
    Sokratis_Siomos

    Verified purchase

    This review is about the welding current (max): 160 A

    The best for welding. Easy to install and handle, a big plus is that it also does electric welding! Without gas, I can say that it doesn't do a good weld, but with gas, it welds great!

    Translated from Greek ·
    Did you find this review helpful?
  • dimitris_kokkinidis242
    5
    1 out of 1 members found this review helpful
    dimitris_kokkinidis242
    This review is about the welding current (max): 160 A

    I'm back with a new comment in a state of desperation about the work; I put it to work with a 3.1kw generator, 2.8 real from Lidl, and I ran it for about an hour on 1.4 millimeters of sturdy galvanized at low amps, and it went like a train, unstoppable, and the generator without a voltage stabilizer (AVR). I was amazed; for so many years I was afraid to try it for fear it would burn out from the currents, but it proved itself once again, my friend.

    Translated from Greek ·
    Did you find this review helpful?
  • kokkinidisdim
    5
    5 out of 6 members found this review helpful
    kokkinidisdim
    This review is about the welding current (max): 160 A

    I have had the 161pro mig since 2015 and I have worked with it a lot every day. The trigger of the clamp works instantly, while in some others it takes a slow 1 second to respond. It is very good, but the 200a is even better

    Translated from Greek ·
    • Machine durability
    • Construction quality
    • Weight
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
    • Power
    Did you find this review helpful?
  • nurretin.bbe
    5
    nurretin.bbe

    Verified purchase

    This review is about the welding current (max): 160 A

    • Power
    • Machine durability
    • Construction quality
    • Volume
    • Easy to use
    • Welding cable length
    • Value for money
    • Weight
  • 5
    George_Pol13

    Verified purchase

    • Power
    • Machine durability
    • Construction quality
    • Easy to use
    • Value for money
    • Weight
    • Volume
    • Welding cable length
  • Sokratis_Siomos
    5
    Sokratis_Siomos

    The best for welding. Easy to install and handle, a big plus is that it also does electric welding! Without gas, I can say that it doesn't do a good weld, but with gas, it welds great!

    Translated from Greek ·
    0
  • dimitris_kokkinidis242
    5
    dimitris_kokkinidis242

    I'm back with a new comment in a state of desperation about the work; I put it to work with a 3.1kw generator, 2.8 real from Lidl, and I ran it for about an hour on 1.4 millimeters of sturdy galvanized at low amps, and it went like a train, unstoppable, and the generator without a voltage stabilizer (AVR). I was amazed; for so many years I was afraid to try it for fear it would burn out from the currents, but it proved itself once again, my friend.

    Translated from Greek ·
    1
  • kokkinidisdim
    5
    kokkinidisdim

    I have had the 161pro mig since 2015 and I have worked with it a lot every day. The trigger of the clamp works instantly, while in some others it takes a slow 1 second to respond. It is very good, but the 200a is even better

    Translated from Greek ·
    5
  • nurretin.bbe
    5
    nurretin.bbe

    0
  • 5
    George_Pol13

    0
  • See all
581,00 €
38,00 €   shipping cost