Waterproofing coating with glass microfibres for exterior horizontal and vertical surfaces. The integrated fibres enhance mechanical properties and elasticity, while the product provides excellent impermeability and protection against moisture. No reinforcing mesh is required.
Suitable for roofs, balconies, canopies, planters and roof joints. Can be applied to cement screed, concrete, porous bricks and tiles, as well as bituminous membranes.
- Colour: terracotta
- Finish: smooth
- Specific gravity: 1.28 ± 0.05 kg/l
- Viscosity: 200 ± 25 PO
- Volume solids: 47 ± 1%
- Weight solids: 61 ± 1%
- Touch-dry time: 2–4 hours at 20 °C and 60% relative humidity
- Recoat time: at least 24 hours at 20 °C and 60% relative humidity
- Recommended coverage: approximately 1.5 L/m² in 2–3 coats, depending on the surface and application method
- Thinning and cleaning: water
The surface must be clean and dry. Stir the product until homogeneous and apply in 2–3 coats. The application and surface temperatures must be between 5 °C and 35 °C. Do not apply in rainy conditions.
Product Details
- Type
- Powder
- Application Surface
- Tiles, Terrace, Wall, Tiles
- Application Surface Material
- Brick, Cementitious, Bituminous Membrane
Additional Specifications
- Polyurethane
- Yes
- Elastomer
- No
- Acrylic
- No
- Bituminous
- Yes
- Cementitious
- No
- 2-Component
- No
Packaging
- Capacity
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.