Skroutz.eu

Weldman Micro Mig 205 Inverter MAG / MIG / MMA / FCAW Welding Machine with Maximum Welding Current of 200A and 60% Duty Cycle
Welding Machines

Weldman Micro Mig 205 Inverter MAG / MIG / MMA / FCAW Welding Machine with Maximum Welding Current of 200A and 60% Duty Cycle

The semi-automatic welder Weldman Micro MIG 200, also known as Super Mig 205, uses IGBT inverter technology and is suitable for semi-professional and professional use.

  • Welding methods: MIG/MAG, MMA,...

The semi-automatic welder Weldman Micro MIG 200, also known as Super Mig 205, uses IGBT inverter technology and is suitable for semi-professional and professional use.

  • Welding methods: MIG/MAG, MMA, FLUX
  • Welding materials: stainless and carbon steel, aluminum, copper, titanium, cast iron
  • Control panel with LCD display and intuitive switches
  • Current...
See full description See full description

Top specs

  • Welding Current

    200

    Suitable for professional use on thick metals, such as steel or cast iron constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
390 05 €
Delivery Tue, 10 Nov - Mon, 16 Nov
47,00 €   shipping cost
Sent from Greece
From Getters 4.6 (110)
4.6 (110 reviews)
Greece
2 pieces
See Tools on the page of Getters

Learn more about invoicing
Review the product
Product report

Description

Description

The semi-automatic welder Weldman Micro MIG 200, also known as Super Mig 205, uses IGBT inverter technology and is suitable for semi-professional and professional use.

  • Welding methods: MIG/MAG, MMA, FLUX
  • Welding materials: stainless and carbon steel, aluminum, copper, titanium, cast iron
  • Control panel with LCD display and intuitive switches
  • Current adjustment: 20–200A
  • Power supply voltage: 230V
  • No-load voltage: 56V
  • Output at 40°C according to EN 60974-1: 200A@60%, 155A@100%
  • Electrode diameter: 1.6–4 mm
  • Wire diameter: 0.6–1.0 mm
  • Protection rating: IP21S
  • Dimensions: 49x24x40 cm
  • Weight: 14 kg
  • Consumption: 7.00 kVA
  • Ground cable length: 200 cm, welding cable length: 300 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MAG, MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
14000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The semi-automatic welder Weldman Micro MIG 200, also known as Super Mig 205, uses IGBT inverter technology and is suitable for semi-professional and professional use.

  • Welding methods: MIG/MAG, MMA, FLUX
  • Welding materials: stainless and carbon steel, aluminum, copper, titanium, cast iron
  • Control panel with LCD display and intuitive switches
  • Current adjustment: 20–200A
  • Power supply voltage: 230V
  • No-load voltage: 56V
  • Output at 40°C according to EN 60974-1: 200A@60%, 155A@100%
  • Electrode diameter: 1.6–4 mm
  • Wire diameter: 0.6–1.0 mm
  • Protection rating: IP21S
  • Dimensions: 49x24x40 cm
  • Weight: 14 kg
  • Consumption: 7.00 kVA
  • Ground cable length: 200 cm, welding cable length: 300 cm

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MAG, MIG, MMA, FCAW

Type

MIG

The easiest welding method even for a beginner. 2. If the wire to be used does not have a special coating (flux), it should be connected to an external gas cylinder (e.g. argon, CO2).

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.

FCAW
It uses flux-coated wire, which releases gases as it burns, creating a protective zone around the molten metal.
Welding Current (max)
200 A

Welding Current (max): 200


Suitable for professional use on thick metals, such as steel or cast iron constructions.
Operation Cycle (max Ampere)
60 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7 kVA

Power: 7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
4 mm

Maximum Electrode Diameter: 4


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.
Maximum Wire Diameter
1 mm

Maximum Wire Diameter: 1


The maximum wire thickness that the machine's wire feed can support, depending on the current intensity it can provide.
Weight
14000 gr

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

390,05 €
47,00 €   shipping cost