Skroutz.eu

Vevor Pump Engine Well 0.49hp
Submersible Water Pumps

Vevor Pump Engine Well 0.49hp

Key features:

  • Operating voltage DC 48V-82V
  • Rated power 369W
  • Maximum flow rate 8.4 GPM
  • Submersion depth up to 20 m
  • Outlet diameter 1 inch
See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    83

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
199 00 €
Delivery Fri, 26 Jun - Tue, 30 Jun
14,00 €   shipping cost
Sent from Greece
From Vevor Hellas
Greece
5 pieces
See Water Pumps on the page of Vevor Hellas
Product report

Description

Description

Solar Autonomy and Power

The solar pump offers complete independence from the power grid, as it operates directly with solar collectors without the need for batteries. With a wide operating voltage range of DC 48V-82V and a rated power of 369W, it allows for the selection of the appropriate power system for a stable and cost-effective water supply.

High Transfer Efficiency

Designed for transferring water over long distances, the pump achieves a maximum head height of 83.29 meters. The flow rate reaching up to 8.4 GPM (1.9 m³/h) ensures sufficient supply, while the ability to submerge up to 20 meters makes it ideal even for deep wells.

Durability and Waterproofing

With an IP68 waterproof rating and an extremely sealed structure, the pump can remain submerged all year round. The double-layer stainless steel filter protects against dirt and particles, extending the lifespan of the mechanism to over 800 hours of operation.

High-Speed Motor

Equipped with a high-speed direct current (DC) motor exceeding 2900 RPM, the pump offers excellent regulation performance and pumping speed. The motor technology ensures minimal losses and optimized operation for immediate water supply under any conditions.

Specifications

  • Model: 3BDPC3.0-50-D48-400
  • Operating Voltage: DC 48V-82V
  • Rated Power: 369W
  • Maximum Head Height: 83.29 m (273 feet)
  • Maximum Flow Rate: 8.4 GPM (1.9 m3/h)
  • Maximum Submersion Depth: 20 m (65.6 feet)
  • Outlet Diameter: 1 inch / 25.4 mm (BSW)
  • Motor Type: DC High Speed (2900+ rpm)
  • Protection Class: IP68
  • Power Cable: 10 m (33 feet)
  • Filter Material: Double-layer stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Engine, Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2900 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
83 m

Maximum Head Height: 83


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
20 m

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product

Description & Specifications

Solar Autonomy and Power

The solar pump offers complete independence from the power grid, as it operates directly with solar collectors without the need for batteries. With a wide operating voltage range of DC 48V-82V and a rated power of 369W, it allows for the selection of the appropriate power system for a stable and cost-effective water supply.

High Transfer Efficiency

Designed for transferring water over long distances, the pump achieves a maximum head height of 83.29 meters. The flow rate reaching up to 8.4 GPM (1.9 m³/h) ensures sufficient supply, while the ability to submerge up to 20 meters makes it ideal even for deep wells.

Durability and Waterproofing

With an IP68 waterproof rating and an extremely sealed structure, the pump can remain submerged all year round. The double-layer stainless steel filter protects against dirt and particles, extending the lifespan of the mechanism to over 800 hours of operation.

High-Speed Motor

Equipped with a high-speed direct current (DC) motor exceeding 2900 RPM, the pump offers excellent regulation performance and pumping speed. The motor technology ensures minimal losses and optimized operation for immediate water supply under any conditions.

Specifications

  • Model: 3BDPC3.0-50-D48-400
  • Operating Voltage: DC 48V-82V
  • Rated Power: 369W
  • Maximum Head Height: 83.29 m (273 feet)
  • Maximum Flow Rate: 8.4 GPM (1.9 m3/h)
  • Maximum Submersion Depth: 20 m (65.6 feet)
  • Outlet Diameter: 1 inch / 25.4 mm (BSW)
  • Motor Type: DC High Speed (2900+ rpm)
  • Protection Class: IP68
  • Power Cable: 10 m (33 feet)
  • Filter Material: Double-layer stainless steel

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Engine, Well

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Battery

Power Source

Battery
Allows the pump to operate independently, using batteries (e.g., 12V or 24V), and is ideal for applications without a fixed electrical connection. Additionally, it can be combined with solar energy
Horsepower
0.49 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
367.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m
Motor Rotation Speed
2900 rpm

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
83 m

Maximum Head Height: 83


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
20 m

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IP68

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

5.0
1
5.0
Review this product
  1. 1
  2. 4 stars
    0
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
199,00 €
14,00 €   shipping cost