White GEL Tile Adhesive C2TE from Piccadilly. PICCADILLY GEL is cement-based and suitable for demanding tile bonding. It consists of cement, quartz sand, and special gel-enhancing additives that ensure proper hydration and fluidity without affecting the workability quality.

• Zero slip with an open time of 30 minutes.
• Capability for strong adhesion on all common substrates.
• High resistance to weather conditions (rain, heat, frost).
• Classified as C2TE adhesive according to standards EN12004-1:2017 and EN12004-2:2017.

Application areas: Suitable for bonding absorbent and non-absorbent, small or large ceramic tiles, stone tiles, marble, granite, and other decorative elements. Ideal for installations in interior and exterior areas, including pools, toilets, bathrooms, saunas, and hammams.

Application instructions: Mix the product with 7.50-7.75 liters of clean water in a clean container. Let the mixture mature for 5 minutes before application. The mixture is ready for use for 1.5-2.0 hours. Apply the adhesive and place the tiles within 30 minutes.

Precautions: The adhesive contains cement and requires the use of protective clothing and gloves. In case of contact with skin or eyes, rinse thoroughly with plenty of water and seek medical advice if necessary.

Substrate preparation: The substrate must be dry, level, and free of foreign materials. Priming with a suitable primer may be required depending on the substrate texture.