The Creality SpacePi X4 filament dryer dries up to 4 spools simultaneously in two chambers with independent temperature control. Active dehumidification, desiccant regeneration, and 360° hot-air circulation help remove moisture and provide even heating. The 3.2″ touchscreen lets you set the temperature and drying time and select the filament type.

It supports PLA, PETG, ABS, ASA, PET, PC, PA, PAHT, PLA-CF, PETG-CF, PA-CF, TPU, PP, and PVA filaments with a diameter of 1.75 mm or 2.85 mm. The chambers can operate independently or individually, while single-chamber mode saves up to 40% energy when running at 85 °C for one hour. The triple protection system includes overheat protection, automatic fan shutoff, and a one-way shutter.

• Capacity: 4 spools
• Spool diameter: Up to 200 mm
• Spool width: Up to 150 mm
• Filament diameter: 1.75 mm or 2.85 mm
• Heating chambers: 2 independently controlled
• Temperature range: 45–85 °C
• Maximum drying temperature: 85 °C
• Drying time: 1–48 hours
• Heating: 2 PTC heaters, 200 W + 200 W
• Air circulation: 360°
• Dehumidification: Active, with automatic desiccant regeneration
• Display: 3.2″ touchscreen
• Settings: Temperature, drying time, filament type, and humidity limit
• Protection: Overheat protection, automatic fan shutoff, and a one-way shutter
• Noise level: 43–46 dB
• Energy consumption: 0.124 kWh in single-chamber mode and 0.208 kWh in dual-chamber mode
• Power: 360 W
• Power supply: 220–240 V, 50/60 Hz
• Dimensions: 382 × 290 × 270 mm
• Weight: 5 kg
• Package contents: Filament dryer, power cord, user manual