Skroutz.eu

Awtools Submersible Water Pump Clean Dirty Water Float Switch 1100W 3-in-1
Submersible Water Pumps

Awtools Submersible Water Pump Clean Dirty Water Float Switch 1100W 3-in-1

The case is made of durable plastic, resistant to impacts and corrosion. Equipped with a float switch connector for automatic pump activation and deactivation. An integrated thermal switch protects...

The case is made of durable plastic, resistant to impacts and corrosion. Equipped with a float switch connector for automatic pump activation and deactivation. An integrated thermal switch protects the motor from overheating. The outlet connection allows the adaptation of hoses with various diameters. Mechanical seal and a waterproof connection cable provide...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    9.5

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The case is made of durable plastic, resistant to impacts and corrosion. Equipped with a float switch connector for automatic pump activation and deactivation. An integrated thermal switch protects the motor from overheating. The outlet connection allows the adaptation of hoses with various diameters. Mechanical seal and a waterproof connection cable provide additional protection against water. 3-in-1 operation allows switching between low base for pumping clean water, dirty water, and suction from flat surfaces. Ideal for garden irrigation or removal of dirty water.

  • Power: 1100W
  • Power supply: 230-240V / 50Hz
  • Protection type: IPX8
  • Performance: 18,000 l/h
  • Maximum submersion depth: 7m
  • Maximum lifting height: 9.5m
  • Maximum liquid temperature: 35°C
  • Connection cable: 10m
  • Maximum dirt size: 1/5/35mm
  • Connection thread: 1”, 1 1/2”
  • Connection diameter: 25-32mm
  • Dimensions: 170x168x365 mm
  • Weight: 6.8kg

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9.5 m

Maximum Head Height: 9.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The case is made of durable plastic, resistant to impacts and corrosion. Equipped with a float switch connector for automatic pump activation and deactivation. An integrated thermal switch protects the motor from overheating. The outlet connection allows the adaptation of hoses with various diameters. Mechanical seal and a waterproof connection cable provide additional protection against water. 3-in-1 operation allows switching between low base for pumping clean water, dirty water, and suction from flat surfaces. Ideal for garden irrigation or removal of dirty water.

  • Power: 1100W
  • Power supply: 230-240V / 50Hz
  • Protection type: IPX8
  • Performance: 18,000 l/h
  • Maximum submersion depth: 7m
  • Maximum lifting height: 9.5m
  • Maximum liquid temperature: 35°C
  • Connection cable: 10m
  • Maximum dirt size: 1/5/35mm
  • Connection thread: 1”, 1 1/2”
  • Connection diameter: 25-32mm
  • Dimensions: 170x168x365 mm
  • Weight: 6.8kg

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
1.46 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
1095 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
7 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
9.5 m

Maximum Head Height: 9.5


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m
Maximum Particle Size
35 mm

Maximum Particle Size

Specifies the largest size of solid particles (such as sand, stones, or other impurities) that the device can pump without clogging or being damaged.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
No
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.