Skroutz.eu

SSD 128GB M.2 NVMe PCI Express 3.0 PPSP128GIMEC3K5EV0
SSD Hard Drives

SSD 128GB M.2 NVMe PCI Express 3.0 PPSP128GIMEC3K5EV0

The Silicon Power MEC3K0E SSD uses a PCIe Gen3x4 connection and the NVMe 1.3 protocol to deliver sequential read speeds of up to 2,600 MB/s and write speeds of up to 2,000 MB/s. Its 3D TLC NAND memory...

The Silicon Power MEC3K0E SSD uses a PCIe Gen3x4 connection and the NVMe 1.3 protocol to deliver sequential read speeds of up to 2,600 MB/s and write speeds of up to 2,000 MB/s. Its 3D TLC NAND memory supports dynamic SLC cache, and it operates at temperatures from -20 °C to 75 °C.

It includes end-to-end data protection and protection against overvoltage,...

See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    PCI Express 3.0

    Connecting to the PCI Express expansion port of the motherboard. Equally popular way of connecting SSD hard drives directly to the motherboard. This connection offers the highest speeds.
  • See all
138 06 €
Delivery Fri, 06 Nov - Tue, 10 Nov
14,00 €   shipping cost
Sent from Greece
From DiogeniStore 4.6 (42)
4.6 (42 reviews)
Greece
1 piece
See Hard Drives on the page of DiogeniStore

Learn more about invoicing
Review the product
Product report

Description

Description

The Silicon Power MEC3K0E SSD uses a PCIe Gen3x4 connection and the NVMe 1.3 protocol to deliver sequential read speeds of up to 2,600 MB/s and write speeds of up to 2,000 MB/s. Its 3D TLC NAND memory supports dynamic SLC cache, and it operates at temperatures from -20 °C to 75 °C.

It includes end-to-end data protection and protection against overvoltage, overcurrent, voltage spikes and short circuits. It also supports TRIM, DEVSLP and the SP SMART tool.

  • Capacity: 128 GB
  • Type: M.2 2280 SSD
  • Interface: PCIe Gen3x4
  • Protocol: NVMe 1.3
  • NAND memory type: 3D TLC
  • Cache: Dynamic SLC
  • Sequential read speed: up to 2,600 MB/s
  • Sequential write speed: up to 2,000 MB/s
  • 4K random read: up to 295,000 IOPS (estimated)
  • 4K random write: up to 210,000 IOPS (estimated)
  • MTBF: 3,000,000 hours (estimated)
  • Power supply: DC 3.3 V
  • Idle power consumption: 280 mA
  • Maximum power consumption: 1,500 mA
  • Operating temperature: from -20 °C to 75 °C
  • Vibration resistance: 15 G, 10–2,000 Hz
  • Drop resistance: 75 cm
  • Shock resistance: 1,500 G at 0.5 ms
  • Encryption: AES 256
  • Data protection: End-to-end
  • Power protection: Power shield
  • Support: TRIM, DEVSLP and SP SMART
  • Packaging: Bulk

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
128 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
PCI Express 3.0

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

PCI Express 3.0
Connecting to the PCI Express expansion port of the motherboard. Equally popular way of connecting SSD hard drives directly to the motherboard. This connection offers the highest speeds.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Silicon Power MEC3K0E SSD uses a PCIe Gen3x4 connection and the NVMe 1.3 protocol to deliver sequential read speeds of up to 2,600 MB/s and write speeds of up to 2,000 MB/s. Its 3D TLC NAND memory supports dynamic SLC cache, and it operates at temperatures from -20 °C to 75 °C.

It includes end-to-end data protection and protection against overvoltage, overcurrent, voltage spikes and short circuits. It also supports TRIM, DEVSLP and the SP SMART tool.

  • Capacity: 128 GB
  • Type: M.2 2280 SSD
  • Interface: PCIe Gen3x4
  • Protocol: NVMe 1.3
  • NAND memory type: 3D TLC
  • Cache: Dynamic SLC
  • Sequential read speed: up to 2,600 MB/s
  • Sequential write speed: up to 2,000 MB/s
  • 4K random read: up to 295,000 IOPS (estimated)
  • 4K random write: up to 210,000 IOPS (estimated)
  • MTBF: 3,000,000 hours (estimated)
  • Power supply: DC 3.3 V
  • Idle power consumption: 280 mA
  • Maximum power consumption: 1,500 mA
  • Operating temperature: from -20 °C to 75 °C
  • Vibration resistance: 15 G, 10–2,000 Hz
  • Drop resistance: 75 cm
  • Shock resistance: 1,500 G at 0.5 ms
  • Encryption: AES 256
  • Data protection: End-to-end
  • Power protection: Power shield
  • Support: TRIM, DEVSLP and SP SMART
  • Packaging: Bulk

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
128 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
PCI Express 3.0

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

PCI Express 3.0
Connecting to the PCI Express expansion port of the motherboard. Equally popular way of connecting SSD hard drives directly to the motherboard. This connection offers the highest speeds.
NVMe
Yes

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

138,06 €
14,00 €   shipping cost
Silicon Power