Vivechrom road marking paint is a single-component specialist paint for marking asphalt, concrete floors in industrial premises, and sports courts. It is made from alkyd resin and chlorinated rubber and is ready to use without thinning. It dries in up to 25 minutes to form a dry film 240 μm thick.
It can be used with glass beads, which can be mixed into the paint or spread over the wet surface to create more reflective lines. Apply using a road marking machine or, on small surfaces, with a roller or brush. Do not apply at temperatures below 10 °C.
- Type: Single-component
- Base: Alkyd resin and chlorinated rubber
- Colour: Yellow
- Finish: Matt
- Weight: 25 kg
- Thinning: Not required
- Drying time: Up to 25 minutes for a dry film 240 μm thick
- Coverage: 1.76 m²/kg for a 200 μm dry film, 1.41 m²/kg for 250 μm, and 1.17 m²/kg for 300 μm
- Specific gravity: 1.57 g/cm³
- Viscosity: 70–80 KU at 25 °C
- Application temperature: From 10 °C
- Application: With a road marking machine, roller, or brush
- Paint-to-glass-bead ratio: 7:3 by weight
- Tool cleaning: Immediately after use with Vivechrom No. 600 General Purpose Thinner
- Flammable: Keep away from heat, sparks, and flames
Specifications
- Type
- Road Marking Paint
- Colour
- Yellow
- Acrilyc
- No
- Luminosity
- Matt
Quantity
- Weight
- 25 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.