Skroutz.eu

X250 SSD 2TB M.2 Type With SATA III Connection
SSD Hard Drives

X250 SSD 2TB M.2 Type With SATA III Connection

The Emtec X250 SSD uses the SATA III protocol and M.2 2280 form factor for computer data storage. It offers read speeds of up to 520 MB/s and write speeds of up to 500 MB/s. Its solid-state design...

The Emtec X250 SSD uses the SATA III protocol and M.2 2280 form factor for computer data storage. It offers read speeds of up to 520 MB/s and write speeds of up to 500 MB/s. Its solid-state design makes it quieter and more resistant to vibration than a traditional hard drive.

It supports ECC (Error Correction Code) for data integrity, static and dynamic wear...

See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all

Learn more about invoicing
Review the product
Product report

Description

Description

The Emtec X250 SSD uses the SATA III protocol and M.2 2280 form factor for computer data storage. It offers read speeds of up to 520 MB/s and write speeds of up to 500 MB/s. Its solid-state design makes it quieter and more resistant to vibration than a traditional hard drive.

It supports ECC (Error Correction Code) for data integrity, static and dynamic wear leveling to extend its lifespan, as well as SMART, TRIM, and low-power management. It is compatible with Windows and Mac OS X.

  • Capacity: 2 TB
  • Communication protocol: SATA III
  • Form factor: M.2 2280
  • Read speed: 520 MB/s
  • Write speed: 500 MB/s
  • Cache type: DRAM-less
  • Technologies: ECC, static and dynamic wear leveling, SMART, TRIM
  • Compatibility: Windows, Mac OS X

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
2000 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
520 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
500 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The Emtec X250 SSD uses the SATA III protocol and M.2 2280 form factor for computer data storage. It offers read speeds of up to 520 MB/s and write speeds of up to 500 MB/s. Its solid-state design makes it quieter and more resistant to vibration than a traditional hard drive.

It supports ECC (Error Correction Code) for data integrity, static and dynamic wear leveling to extend its lifespan, as well as SMART, TRIM, and low-power management. It is compatible with Windows and Mac OS X.

  • Capacity: 2 TB
  • Communication protocol: SATA III
  • Form factor: M.2 2280
  • Read speed: 520 MB/s
  • Write speed: 500 MB/s
  • Cache type: DRAM-less
  • Technologies: ECC, static and dynamic wear leveling, SMART, TRIM
  • Compatibility: Windows, Mac OS X

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
2000 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less

Dimensions

Form Factor
M.2 (Type 2280)

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

M.2 (Type 2280)
The motherboard must support the form factor in order for the SSD to be installed on it. It is worth noting that M.2 drives are divided into those that use the SATA protocol and those that use PCI Express. Of the SSDs that use the PCI Express protocol, most also support NVMe technology, which allows them even faster speeds if supported by the motherboard.

Performance

Read Speed
520 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
500 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

287,48 €
14,00 €   shipping cost
Emtec