Technical Specifications
- Type: RDZ-211
- Operating range: 5-862 MHz
- Maximum IN-OUT loss: 4.0 dB
- Output resistance: 75 Ohm
- IN-OUT socket type: F connector
- DC transmission IN-OUT: yes, +12 V (circuit without capacitor)
- Maximum transmitted voltage IN-OUT: 250 mA
Features
- RTV splitter/combiner
- DC transmission: +12 V/250 mA
- Solid, cast metal housing
- Includes waterproof ABS enclosure
- Easy installation and connection
The RDZ-211 is a splitter/combiner designed for use in collective and individual RTV antenna installations. Its purpose is to split or combine 2 antenna signals. It can be mounted in a waterproof ABS enclosure, allowing it to be placed outside the room, for example, on an antenna mast. To ensure proper operation of the device, particular attention must be paid to correct installation and connection. The device can be used in cases where the signal level is sufficiently high so that its division, and consequently the reduction of 4dB, does not result in the final level at the subscriber's socket being below 51dBuV (minimum according to standard PN-EN 60728-1). It is highly recommended in cases where it is not possible to implement a "star" installation by offering cables from all sockets to a single enclosure.
- Type
- Splitter
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.