Skroutz.eu

Yato Waterproof Extension Cable Cord 3 x 1.5mm²/10m Copper
Extension Cords

Yato Waterproof Extension Cable Cord 3 x 1.5mm²/10m Copper

Extension cord made with a plug resistant to dust and splashes. The cable is made from chlorinated polyethylene (CPE) and is suitable for use indoors and outdoors. It is resistant to oils, acids, most...

Extension cord made with a plug resistant to dust and splashes. The cable is made from chlorinated polyethylene (CPE) and is suitable for use indoors and outdoors. It is resistant to oils, acids, most solvents, and sunlight. It does not harden in cold conditions and does not propagate fire. It has high resistance to aging.

  • Maximum operating voltage: ~250 V
    • ...
See full description See full description
  • Length 10 m

  • Cable Cross-Section

    It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

    3 x 1.5

    Ideal for larger household appliances such as dishwashers, low-power electric cookers, or lighting fixtures in large rooms.

  • Maximum Load

    The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

  • Protection Certification

    IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

    IP44

    • Protection against solids: 2 → Objects > 12mm (e.g. finger).
    • Protection against water: 0 → No protection.
    • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
     

  • Output Voltage

    Single-phase

    The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
  • See all
Review the product
Product report

Description

Description

Extension cord made with a plug resistant to dust and splashes. The cable is made from chlorinated polyethylene (CPE) and is suitable for use indoors and outdoors. It is resistant to oils, acids, most solvents, and sunlight. It does not harden in cold conditions and does not propagate fire. It has high resistance to aging.

  • Maximum operating voltage: ~250 V
  • Maximum load: 16 A
  • Continuous operation: up to 3680 W
  • Three-core steel conductor with a cross-section of 1.5 mm²
  • External diameter with insulation: ~9.0 mm
  • Insulation/coating material: CPE
  • Individual conductor insulation material: EPDM
  • Plug resistant to dust and splashes with IP44 protection rating, for protection against moisture, dust, and sand.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Specifications

Type
Cable
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Colour
Copper
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
10 m
Cable Cross Section
3 x 1.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 1.5

Ideal for larger household appliances such as dishwashers, low-power electric cookers, or lighting fixtures in large rooms.
Output Voltage
Single-phase

Output Voltage

Single-phase

The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
Nominal Maximum Load
3680 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Protection Certification
IP44

Protection Certification

IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

IP44
  • Protection against solids: 2 → Objects > 12mm (e.g. finger).
  • Protection against water: 0 → No protection.
  • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
 
Waterproof
Yes
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Extension cord made with a plug resistant to dust and splashes. The cable is made from chlorinated polyethylene (CPE) and is suitable for use indoors and outdoors. It is resistant to oils, acids, most solvents, and sunlight. It does not harden in cold conditions and does not propagate fire. It has high resistance to aging.

  • Maximum operating voltage: ~250 V
  • Maximum load: 16 A
  • Continuous operation: up to 3680 W
  • Three-core steel conductor with a cross-section of 1.5 mm²
  • External diameter with insulation: ~9.0 mm
  • Insulation/coating material: CPE
  • Individual conductor insulation material: EPDM
  • Plug resistant to dust and splashes with IP44 protection rating, for protection against moisture, dust, and sand.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Specifications

Type
Cable
Type
Open Type

Type

Open Type

The reel is open, you can see the cable wound.
Colour
Copper
Automatic Cable Rewind
No

Automatic Cable Rewind

The cable automatically retracts back into the reel with a "click", just like with a vacuum cleaner.
Industrial Type
No

Industrial Type

Durable socket for heavy-duty use (e.g. construction sites, workshops)

Technical Features

Length
10 m
Cable Cross Section
3 x 1.5 mm²

Cable Cross Section

It is the "thickness" of the cable. The thicker it is, the more current it can handle without its temperature rising.

3 x 1.5

Ideal for larger household appliances such as dishwashers, low-power electric cookers, or lighting fixtures in large rooms.
Output Voltage
Single-phase

Output Voltage

Single-phase

The single-phase extension reel connects to a household or professional 230V AC supply. It is intended for low or medium power devices, such as lamps, computers, or tools. The operating current usually ranges between 10–16A. It is easy to use and transport, but cannot power high-power machines. It is recommended to use cables of suitable cross-section to avoid overheating.
Nominal Maximum Load
3680 W

Nominal Maximum Load

The maximum electrical load that the extension reel can support without overheating. This applies only when the extension reel is fully unwound. When it is wound, the allowable power is lower due to overheating.

Safety & Protection

Protection Certification
IP44

Protection Certification

IP protection indicates the resistance of an electrical component to dust and water. The first digit (0–6) refers to protection against solid objects, from none to complete protection against dust. The second digit (0–9) refers to protection against liquids, from drips to full immersion or high-pressure water. For example, IP44 means protection against limited dust and water splashes, while IP67 means complete dust protection and immersion up to 1 meter.

IP44
  • Protection against solids: 2 → Objects > 12mm (e.g. finger).
  • Protection against water: 0 → No protection.
  • Use: Indoor areas, dry installations, such as lighting fixtures or computers.
 
Waterproof
Yes
Overload Protection
No

Overload Protection

The overload protection / thermal switch automatically cuts off the power flow in case of excessive load or overheating, protecting both the device and the cable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

35,34 €
14,00 €   shipping cost