TILELUX is a specially designed high-quality satin water-based paint for wall tiles. Its formulation and the use of the special additive STEPlus make it unique for coloring tile surfaces that are exposed to particularly difficult and humid environments. It is characterized by excellent adhesion even on glossy tiles (>6Mpa) and by outstanding resistance in humid environments, to the use of shampoos, shower gels, classic cleaning products, descaling products, diluted bleach, white vinegar, and in the alternating use of hot and cold water.

Features-Properties:

• Easy application
• Excellent finish
• No primer needed
• Excellent adhesion
• Outstanding resistance in humid environments
• Outstanding resistance to cleaners, bathroom products, and in the alternating use of hot and cold water

Instructions for Use:

• Add the special additive STEPlus and stir very well for about 5 minutes.
• Dilution: 10-15% with water.
• Application: Apply TILELUX in two coats using a roller or brush. A third coat may be applied depending on the shade and gloss of the surface.
• Coverage: Approximately 12-14 m²/l on properly prepared surfaces.

General Notes:

• For the best possible result, it is recommended to use the mixture of paint with the special additive STEPlus within 10 days.
• The product is applied under room temperature conditions, from 12°C to 25°C.
• The optimal performance and adhesion of the product are achieved after 15-20 days from application.
• During this period, avoid direct impact, rubbing, and cleaning of the surface.
• To clean painted surfaces, use a mild detergent and a soft sponge.
• Wash tools immediately after application with water and detergent (if deemed necessary).