To ensure proper adhesion of the product, the surface must be cleaned of dust, grease, oils, rust, mold residues, or moisture. On old varnished floors, sand the surface well with appropriate sandpaper. Prime the surface with the corresponding recommended primer of the product.
Shake the product well and apply one coat. After 6 hours, apply a second coat. The product acquires all its mechanical strength after 20 - 30 days.
APPLICATION CONDITIONS- Avoid applying the product at temperatures below 6°C and above 40°C.
- Avoid application when the relative humidity is greater than 80%.
- Adverse conditions during application can alter the final properties of the product.
- Brush
- Roller
- Paint gun
During work, keep the tools "wet" in the container with the product. After use, clean the tools immediately with White spirit. If the product dries, it can only be removed with strong detergents. Do not dump the washing liquids into the water table.
TECHNICAL CHARACTERISTICS:- YIELD: 10-15m2 / L per coat.
- DILUTION: 1 - 5% White spirit.
- DRYING: 2 - 4 hours depending on the application conditions.
WARNING: Wear protective gloves, protective clothing, and eye and face protection. In case of contact with eyes, rinse carefully with plenty of water for several minutes. If contact lenses are present, remove them if easy. Continue to rinse.
- Product Number
- 520600002188
- Type
- Impregnation Varnish
- Surface Material
- of Wood
- Glossiness
- Matte
- Insecticide / Antifungal
- No
- Diluting Agent
- Water
- Polyurethane
- No
- 2-Component
- No
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.