The FOLKSAFE FS-HDP4110P Video Balun allows the transfer of video from a camera to a recorder via UTP Cat 5e/6 cable. It also supports powering the camera through the same cable.

Product Highlights:

• Single Channel POC & HD Video Balun
• Real-time signal transmission via UTP Cat 5e/6 cable
• Compatible with HD-TVI/CVI/AHD/CVBS & POC analog cameras
• Power & video transmission through a single cable

Technical Specifications:

• Transmission distance chart with power:
• -10 meters, 47.45V, 200mA, 9.49W
• -30 meters, 46.81V, 200mA, 9.36W
• -50 meters, 45.57V, 200mA, 9.10W
• -100 meters, 44.33V, 200mA, 8.87W
• -150 meters, 41.81V, 200mA, 8.36W
• Transmission distance chart without power:
• -HD-TVI 720p: 400m
• -HD-TVI 1080p: 250m
• -HD-TVI 3MP: 250m
• -HD-TVI 4MP: 180m
• -HD-TVI 5MP: 180m
• -HD-TVI 4K: 130m
• -HD-CVI 720p: 450m
• -HD-CVI 1080p: 250m
• -HD-CVI 4MP: 200m
• -HD-CVI 4K: 200m
• -HD-AHD 720p: 450m
• -HD-AHD 960p: 320m
• -HD-AHD 1080p: 250m
• -HD-AHD 3MP: 250m
• -HD-AHD 4MP: 200m
• -HD-AHD 5MP: 180m
• -HD-AHD 4K: 150m
• -CVBS: 400m
• Video:
• -Attenuation: 1.5 dB typ Max
• -Common-mode/Differential-mode rejection: 15KHz to 71MHz 60 dB typ
• -Impedance: Coax, Male BNC 75Ω unbalanced / UTP, push-pin terminal block 100Ω balanced
• Wire type:
• -Network wiring: One unshielded twisted pair (for each video signal), 24-16 AWG (0.5-1.31mm)
• -Category type: UTP Cat 5e/6
• -Impedance: 100 +/- 20 ohms
• Connector:
• -Video input/output: Male BNC connector
• -Video input/output: Tool-less push-pin terminal block