US-52 220V Speed Controller 300W

• The speed control range of the controller is 90-1400r/min and 90-1700r/min respectively at 50/60Hz.
• The controller is made with high-quality electronic components, and its performance is stable and reliable.
• The control accuracy is high and fine speed adjustment is achieved.
• The product's operation is simple, allowing new users to learn and understand the operating method quickly.
• It is widely used in fields such as packaging, printing, food, electronics, instruments, medical equipment, and production in the clothing industry as a speed drive device.

Specifications:

• Product Model: US-52
• Compatible Power: 300W; 400W; 500W (optional)
• Working Voltage: AC220V 50/60HZ (Voltage variation range ±10% Ue)
• Operating Environment: -10~+50℃
• Relative Humidity: <90%
• Speed Range: 90-1400r/min 50HZ, 90-1700r/min 60HZ

Installation and Usage Method:

• The controller has 6 wires: the black wire is the main wire, the red and white are the secondary wires of the capacitor, the two blue wires are the speed feedback wires, and the green wire is the ground wire.
• Turn off the power, connect according to the wiring diagram, and confirm that the connection is correct; do not modify it arbitrarily.
• Set the external speed wheel to "0" before use to avoid transient high currents and damage to the controller.
• This product is controlled by the feedback voltage of the generator, and the control line is divided into two lines: "blue" and "yellow".
• When the controller is connected and it is found that the torque or speed does not meet the requirements, the US-52 adjusts the side trimmer potentiometer (speed adjustment).
• To change the direction of operation, simply swap the "CCW" and "CW" terminals in the wiring at the back of the controller.
• When changing direction, the change must be made after the operation has completely stopped. 1) Select COM and short circuit CW, then the line rotates clockwise; 2) Select COM and short circuit CCW, then the line rotates counterclockwise.
• The action switch only controls operation or inactivity, and does not interrupt the power supply. If not used for a long time, please turn off the power.