Stainless adhesive Prolok WP-77 for tight connections in piping systems with high viscosity and medium strength. Facilitates and speeds up the assembly of hydraulic components (connections, pipes, valves, sockets, manometers, etc.) made of copper, brass, aluminum, black steel, and stainless steel. Thanks to its thixotropic consistency, it perfectly seals the connected elements. Once dried, it creates a connection resistant to pressure up to 680 bar, which does not age and at the same time protects from impacts and vibrations.

• Replaces hemp, paints, tapes, and PTFE threads
• Accelerates the assembly time of components
• Compatible with all types of metals
• Resistant to vibrations and loads
• Provides anti-corrosion protection on threads
• Can be removed with manual tools

Instructions for use:

• Thoroughly clean and degrease the surfaces of the elements to be connected.
• After long periods of inactivity, shake the container several times.
• Apply around the circumference of the tight connection, if possible on the female thread side.
• After applying the adhesive, immediately screw the elements together. Do not move the sealed elements for 15 minutes.
• Full bonding strength is achieved after 24 hours.
• Disassembly is possible with manual tools.

Parameters:

• Color: yellow
• Temperature range: -55°C to +150°C
• Viscosity at +25°C: 35,000 – 60,000 mPa·s
• Maximum gap filling: 0.25 mm
• Working pressure: after 20 minutes – 2 bar, after 24 hours – 680 bar
• Breakaway torque: 8 – 20 Nm
• Contact strength: 15 minutes
• Final strength: 24 hours

Capacity: 50 ml