Skroutz.eu

SSD 1TB 3.5'' Type With SATA III Connection CP-SSD-3.5-TLC-1000
SSD Hard Drives

SSD 1TB 3.5'' Type With SATA III Connection CP-SSD-3.5-TLC-1000

The CoreParts CP-SSD-3.5-TLC-1000 internal SSD has a capacity of 1 TB and a 3.5″ form factor. It connects via SATA III and uses TLC NAND memory. Sequential read and write speeds reach up to 550 MB/s,...

The CoreParts CP-SSD-3.5-TLC-1000 internal SSD has a capacity of 1 TB and a 3.5″ form factor. It connects via SATA III and uses TLC NAND memory. Sequential read and write speeds reach up to 550 MB/s, making it suitable for system acceleration, fast boot times, and data storage.

  • Capacity: 1 TB
  • Form factor: 3.5″
  • Connection: SATA III
  • Read speed: up to 550 MB/s...
See full description See full description

Top specs

  • Communication Protocol

    Most SSDs use SATA III or PCI Express.

    Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


    PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

    SATA III

    Modern hard drive connection standard.

    The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.

  • Write Speed

    Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

    For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

  • Read Speed

    Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

    An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

    These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
  • See all
236 98 €
Delivery Fri, 13 Nov - Thu, 19 Nov
14,00 €   shipping cost
Sent from Greece
From Techstores 4.8 (100)
4.8 (100 reviews)
Greece
2 pieces
See Hard Drives on the page of Techstores

Learn more about invoicing
Review the product
Product report

Description

Description

The CoreParts CP-SSD-3.5-TLC-1000 internal SSD has a capacity of 1 TB and a 3.5″ form factor. It connects via SATA III and uses TLC NAND memory. Sequential read and write speeds reach up to 550 MB/s, making it suitable for system acceleration, fast boot times, and data storage.

  • Capacity: 1 TB
  • Form factor: 3.5″
  • Connection: SATA III
  • Read speed: up to 550 MB/s
  • Write speed: up to 550 MB/s
  • NAND memory type: TLC
  • Cache: DRAM-less

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Details

Capacity
1000 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
Write Endurance (TBW)
-

Write Endurance (TBW)

Shows the total amount of data (in TB) that the SSD can write over its lifetime, according to the manufacturer’s specifications. A higher value means greater theoretical endurance for frequent data writes.
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
3.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
550 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The CoreParts CP-SSD-3.5-TLC-1000 internal SSD has a capacity of 1 TB and a 3.5″ form factor. It connects via SATA III and uses TLC NAND memory. Sequential read and write speeds reach up to 550 MB/s, making it suitable for system acceleration, fast boot times, and data storage.

  • Capacity: 1 TB
  • Form factor: 3.5″
  • Connection: SATA III
  • Read speed: up to 550 MB/s
  • Write speed: up to 550 MB/s
  • NAND memory type: TLC
  • Cache: DRAM-less

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Details

Capacity
1000 GB

Capacity

The golden ratio of cost and capacity for now is 500GB and 1TB.

For gaming or professional programs that require a lot of space for their installation, a capacity of at least 500GB is recommended. 

As an indication, a 1TB hard drive can hold about 250 thousand photos taken with a 12MP camera or 250 movies.
Communication Protocol
SATA III

Communication Protocol

Most SSDs use SATA III or PCI Express.

Almost all 2.5" SSDs connect via SATA III while most M.2 SSDs connect via PCI Express.


PCI Express connection offers higher speeds, but this is mainly noticeable in demanding applications (high-resolution video processing, transferring large files, etc.) and is not necessary for everyday use.

SATA III
Modern hard drive connection standard.

The majority of SSD hard drives use this standard. The motherboard must support it for the disk to operate at its maximum potential.
NVMe
No

NVMe

Communication template that enhances the performance and speed of SSDs.

The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (high-resolution video processing, transferring large files, etc.) and are not necessary for simple everyday use.
Heatsink
No

Heatsink

The SSD is equipped with a heatsink to maintain low temperatures, ensuring better performance and more efficient heat dissipation in the SSD.
Compatible with PlayStation 5
No

Compatible with PlayStation 5

Compatible with PS5.
Cache Type
DRAM-less
Write Endurance (TBW)
-

Write Endurance (TBW)

Shows the total amount of data (in TB) that the SSD can write over its lifetime, according to the manufacturer’s specifications. A higher value means greater theoretical endurance for frequent data writes.
NAND Flash Type
TLC

NAND Flash Type

The type of flash memory used by the SSD. It affects the drive's durability, performance, and cost.

TLC
The most common option, offering a very good balance between performance, durability, and cost.

Dimensions

Form Factor
3.5''

Form Factor

The term form factor refers to the physical size of SSDs. The motherboard must support the form factor of the SSD in order for it to be installed.


The higher speeds offered by an NVMe drive are mainly applicable to demanding applications (such as high-definition video processing, transferring large files, etc.) and are not necessary for everyday use.

Performance

Read Speed
550 MB/s

Read Speed

Indicative size for the maximum speed of the hard disk during data reading. The larger the size, the faster the data reading speed.

An average reading speed for an SSD using the SATA III protocol is 600MB/s, while for one with NVMe it is 2000MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable. 
Write Speed
550 MB/s

Write Speed

Indicative size for the maximum speed of the hard disk during data recording. The larger the size, the faster the data recording.

For an SSD that uses the SATA III protocol, the average recording speed is 300MB/s, while for one with NVMe it is 1200MB/s.

These differences make sense in particularly demanding use cases (e.g. high-resolution video editing). For most users, the differences will not be noticeable.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

236,98 €
14,00 €   shipping cost

CoreParts