The electric spray gun BAP7050 provides absolute control, thanks to its powerful airless painting system. It guarantees a flawless finish without joints in the paints and can be used with solvent or water-based paints, varnishes, and wood preservatives.

• Voltage/Frequency: 220V/50Hz
• Usage: with a 3x2.5m extension cord

Nozzle and Filter Selection Instructions:

The nozzles have a code on them. This code is divided into two parts. The first number indicates the size of the fan the gun makes at a distance of 12 inches from the surface, which is multiplied by two to find the result. The second number is the amount of material that passes through the nozzle and is measured in thousandths of an inch. Smaller numbers are for a smooth final result but small surface coverage. Larger numbers are for greater coverage and less smooth results.

Operating Pressure: from 2200-3000 psi, depending on the surface and material.

Material Table in Relation to Nozzle Size:

• Varnishes and Lacquers: Nozzle 0.009-0.013
• Oil Paints: Nozzle 0.013-0.015
• Plastic Paints: Nozzle 0.015-0.019
• Exterior Paints and Sealants: Nozzle 0.025+

Filter Selection in Relation to Nozzle:

• Nozzle No 0.009 - 0.013 (Varnishes and Lacquers): 120 mesh filter
• Nozzle No 0.013 - 0.015 (Oil Paints): 100 mesh filter
• Nozzle No 0.015 - 0.019 (Plastic Paints): 80 mesh filter
• Nozzle No 0.025 - 0.033 (Exterior Paints): 60 mesh filter
• Nozzle No 0.025 - 0.033 (Exterior Paints and Sealants): 30 mesh filter