Two-component polyurethane primer for the protection of surfaces with special requirements. Ideal substrate for long-lasting durability and high filling capacity when combined with Polylac. Suitable for above and below waterline parts of boats made of wood, plywood, polyester, or metal. Used in polyester pools on surfaces inside and outside the water. Can be used as a filler for polyester irregularities.

Application:

• Clean the surface from dust, grease, oils, and other residues.
• Sand the surface and remove the dust.
• Add component B to component A in a ratio of 2:1 and mix until the mixture becomes homogeneous.
• Mix well before use, avoiding temperatures below 6°C and above 40°C, as well as relative humidity greater than 80%.
• Apply the Blend primer in 1-2 coats and let it dry for 1 hour.
• Re-coatable after 2-4 hours.

Yield: 10-12m2 / Lt per coat

Drying: 1 hour (depending on application conditions)

Caution: Wear protective gloves and comply with personal protective measures. In case of eye contact, rinse with plenty of water and call the POISON CENTER at 210 7793777.