High-quality acrylic plaster ideal for building facades, resistant to extreme weather conditions with excellent protective properties against UV radiation. It is extremely compact, has excellent adhesion and elasticity.

General Features

• Can be used for the protection and decoration of both exterior and interior surfaces (plaster, concrete, thermal insulation systems for building facades).
• Certified with CE marking according to the EN 15824 standard.
• Certificate number: ETA-15/0148.
• Excellent protective properties against UV radiation.
• Excellent adhesion and elasticity.

Instructions

• Preparation: Surfaces must be clean, dry, and smooth, free from dust, oils, or any loose materials or paint.
• On new surfaces made of cement, concrete, plasterboard, or surfaces previously covered with plastic or acrylic water-based paints, apply Granikot Primer.
• Application: Stir well before use. Apply with a stainless steel spatula, diluted with a maximum of 2% water, and use a plastic spatula to create the final effect.
• Do not apply at temperatures lower than 5°C, higher than 35°C, and/or relative humidity above 80%.
• Do not apply the product during rain or in conditions of high humidity and strong wind.
• Protect surfaces from uneven exposure to sunlight to prevent uneven drying.
• Avoid direct exposure to sunlight. The product is dry to the touch in 4-6 hours and set through in 24 hours. These times may vary depending on weather conditions (relative humidity and temperature).
• After full curing, the applied material no longer requires any protection from extreme weather conditions.
• Tools should be cleaned immediately after use with water and, if necessary, with soap or detergent.