Description
Specifications
Vivechrom floor paint is a two-component, water-based epoxy paint for interior floors and walls. It creates a satin finish that is resistant to chemicals, impact and abrasion. Suitable for application on concrete, cement-based plaster and plasterboard.
- Type: Two-component, water-based epoxy paint
- Volume: 5 L
- Finish: Satin
- Use: Interior floors and walls
- Substrates: Concrete, cement-based plaster and plasterboard
- Resistance: Resistant to chemicals, water, aqueous solutions, mild acids and alkalis, road salts, oils and greases
- Impact and abrasion resistance: Taber 70 ± 10 mg / 1,000 cycles
- Cleaning: With water and synthetic detergents
- Approval: BAM-approved for disinfection according to DIN 25415, Part 1
- Mixing ratio: A:B = 80:20 by volume
- Thinning: With water, up to 10% for the first coat and up to 3% for subsequent coats
- Pot life: 1.5 hours at 20 °C and approximately 25 minutes at 30 °C
- Walk-on time: Approximately 8 hours
- Recoat time: 16–72 hours at 20 °C and 60% relative humidity
- Full cure: Allow at least 7 days before normal use
- Application temperature: 10–35 °C
- Application relative humidity: Up to 85%
- Solids content: 50% by volume and approximately 63% by weight
- VOC content: Up to 10 g/L
- Coverage on walls: Approximately 8 m²/L
- Coverage on floors: 3.5–5.5 m²/L per coat
- Tool cleaning: Clean immediately with water
Specifications
- Type
- Floor Painting
- Acrilyc
- No
- Luminosity
- Satine
Quantity
- Volume
- 5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.