Vivechrom Road Marking paint is a single-component coating based on alkyd resin and chlorinated rubber. It can be applied to asphalt, concrete floors in industrial premises, and sports courts using a line-marking machine or, on small areas, a roller or brush. It is ready to use without thinning and dries in up to 25 minutes to a dry film thickness of 240 μm. When used with glass beads, it produces lines with increased reflectivity.
The beads can be mixed with the paint before application or spread over the wet paint. Apply at a temperature of at least 10 °C. Clean tools immediately with Vivechrom General Purpose Thinner No. 600.
- Type: Single-component
- Base: Alkyd resin and chlorinated rubber
- Colour: Yellow
- Finish: Matte
- Weight: 5 kg
- Thinning: Not required
- Drying time: Up to 25 minutes for a dry film thickness of 240 μm
- Coverage: 1.76 m²/kg for a dry film thickness of 200 μm, 1.41 m²/kg for 250 μm, and 1.17 m²/kg for 300 μm
- Specific gravity: 1.57 g/cm³ (ISO 2811)
- Viscosity: 70–80 KU at 25 °C
- Application temperature: At least 10 °C
- Paint-to-glass-bead ratio: 7:3 by weight
- Flammable: Store away from heat, sparks, and flames
Specifications
- Type
- Road Marking Paint
- Colour
- Yellow
- Acrilyc
- No
- Luminosity
- Matt
Quantity
- Weight
- 5 kg
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.