Water-repellent ecological grout for tile joints. It is used for grouting wall and floor coverings made of ceramic tiles (mosaics, natural stones, etc.), of any type, both for indoor and outdoor areas.

Characteristics:

• Mixture of cement and aggregates with the addition of resins and hydrophobic additives.
• With the addition of water, it turns into a paste that is easy to work with for filling tile joints.
• Dries and hardens perfectly, offering a flawless result without cracks.
• Waterproof and resistant to detergents and dirt.
• Suitable for narrow (0-3mm) and wide (4-20mm) joints.

Application Method:

• The joints to be covered must be clean. In case the tiles were installed with adhesive, they can be grouted after the adhesive has set (at least 24 hours).
• Mix 3 parts grout with 1 part cold water in a clean container. The mixture can be used for at least 2 hours.
• Fill the joints using a plastic or rubber spatula and remove excess grout after 15 minutes. Clean the tile surface with a dry cloth.
• Avoid application at temperatures below +5ºC. Moisten surfaces in hot months.
• Clean tools, clothes, and hands with water.