The EuroSpot ZigBee 3.0 5-in-1 LED Controller is suitable for all types of low-voltage LED strips, such as single color, CCT, RGB, RGBW, and RGBCCT. It is the most modern Controller that incorporates management of RGB, color temperature, and brightness.

Functions:

• Connects to the LED strip. Note: The input voltage to the controller should match the voltage of the LED strip you are connecting to the controller. Input Voltage = Output Voltage.
• Smart Link/Unlink: The Controller offers 3 methods for connection/disconnection via the App.
• Changing Color Mode (5-in-1): Press the “SET” button briefly to change the mode. If the indicator light blinks, the change has been successfully set.
• Auto-Synchronization Mode: Multiple Controllers can operate simultaneously, with different start times, controlled by the same remote control.
• Auto-transmitting Diagram (Command Transmission): One Controller can retransmit the signal from the remote control to another Controller if the second is within a radius of less than 30m (without obstacles).

Indicator Light (Pilot Lamp) Legend:

• Red Light Steady On: Disconnected from the network.
• Green Light Steady On: Successfully connected to the network.
• Red Light Blinking: Waiting for Smart Link (Pairing).
• Blue Light Steady On: WiFi Router disconnected with Controller control capabilities.

Tip: First complete the installation/configuration of power supplies/Controllers/LED strips and then set their operation. Use the “SET” button and follow the corresponding instructions for the coloring of the Controller’s indicator light.