Berling Anti Graffiti surface varnish is clear, glossy and water-based, designed to protect surfaces from graffiti. It can be applied to wood, plaster, exposed concrete and walls painted with emulsion or acrylic paints without changing the substrate’s colour. Graffiti can be removed with pressurised water or, if necessary, with solvent, while the film retains its durability after repeated cleaning.
Writing made with whiteboard markers can be cleaned with a slightly damp cloth. The varnish offers chemical resistance, adhesion and resistance to weather conditions and UV radiation, as well as resistance to yellowing. It has been tested with most commercially available spray paints.
- Surface material: Wood
- Colour: Clear
- Gloss level: Glossy, over 85 units at 60°
- Type: Water-based, two-component polyurethane varnish
- Protection: Against graffiti
- Coverage: 10–12 m²/lt, depending on the surface
- Touch dry: 1–1.5 hours
- Full drying time: At least 24 hours
- Recoat time: After 2 hours and before 24 hours have elapsed
- Number of coats: 3 for full coverage
- Thinning the first coat: With water, up to 15%
- Thinning the final coats: With water, up to 6%
- Mixing ratio: 3 parts Component A to 1 part Component B by volume
- Pot life: 2.5 hours at 25 °C
- Application temperature: 12–30 °C
- Relative humidity during application: Up to 75%
- VOC content: Up to 70 g/lt
- Application: With a roller or brush
- Full resistance: After 7 days
- Product Number
- 111074.375+111074.125
- Type
- Surface Varnish
- Surface Material
- of Wood
- Glossiness
- Gloss
- Insecticide / Antifungal
- No
- Diluting Agent
- -
- Polyurethane
- No
- 2-Component
- No
- Colour
- Colorless
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.