Water-repellent, colored, resinous, cementitious grout with porcelain texture CG2 WA. It is characterized by high water repellency, high mechanical strength, and color stability. It contains special bacteriostatic components, which prevent the growth of bacteria in the joint.

It provides a smooth and glossy final surface. Suitable for joint widths of 1-8 mm. Classified as a grout of type CG2 WA according to EN 13888 & ISO 13007-3. Test report number: 20/22375-905 & 20/22375-1316, APPLUS Laboratories.

Fields of application:

• Suitable for grouting wall or floor tiles of any kind, for indoor or outdoor spaces.
• Suitable for contact with food.
• Suitable for contact with drinking water.

Consumption: 0.2-2.0 kg/m², depending on the dimensions of the tiles and the width of the joint.

Usage instructions:

• Substrate: The tiled surface must be clean. The joints are carefully cleaned and wetted with a damp sponge.
• Application: Add MULTIFILL-SMALTO 1-8 to water while stirring until a homogeneous mixture is obtained. It is recommended to mix using a low-speed mixer (drill). Allow the mixture to mature for approximately 3 minutes and stir again. Spread the mixture over the joints with a rubber spatula, ensuring they are filled to their full depth. The excess material is removed after a while with a damp sponge. Finally, clean the tile surface with a dry cloth.

In outdoor spaces or when the temperature is high, it is recommended to moisten the joint after a few hours once the grout has dried.

The product contains cement, which reacts alkaline with water and is classified as an irritant. Consult the safety usage instructions and precautions listed on the packaging.