To ensure proper adhesion of the product, the surface to be painted must be cleaned of dust, grease, oils, flaking old paint, rust, mold debris, or moisture.

For new or porous surfaces, first apply the corresponding recommended primer of the product (Life dur, Life dur water).

Apply the product in 2 coats (after shaking it well), which should be spaced 1 - 2 hours apart. The product achieves all its mechanical strengths after 20 - 30 days.

• First coat: 15% water.
• Second coat: 5-10% water.

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is above 80%. Adverse conditions during application can affect the final properties of the paint.

• Brush
• Roller
• Spray gun

During work, keep the tools “wet” in the container or in the product’s vessel. Wipe the tools well back into the box and clean them immediately with warm water and soap. If the product dries, it can only be removed with strong detergents. Do not pour washing liquids into the groundwater.