Berling BETO-FLOOR is a one-component, solvent-based alkyd-polyurethane concrete paint for concrete floors, pavements, paved surfaces, plaster, brick and stone. Suitable for interior and exterior use, it withstands moderate wear, weather changes and the alkalinity of cement. It offers good adhesion and coverage.
On new surfaces, apply two coats directly after removing mud and oil. On previously painted surfaces, remove any old or peeling paint with sandpaper, then apply one coat of Berling FIXATEUR solvent-based primer followed by two coats of BETO-FLOOR. Apply directly to clean surfaces. Thin with White Spirit by up to 15% by volume, depending on the application method, and apply with a brush or roller. Clean tools with White Spirit; dispose of leftover product as hazardous waste.
- Type: One-component, solvent-based alkyd-polyurethane concrete paint
- Colour: Grey
- Volume: 10 L
- Use: Interior and exterior
- Suitable surfaces: Concrete floors, pavements, paved surfaces, plaster, brick and stone
- Resistance: Moderate wear, weather changes and the alkalinity of cement
- Coverage: 9–11 m²/L, depending on the surface’s absorbency
- Touch dry: 2–4 hours
- Recoating: After 16 hours
- Thinning: White Spirit, up to 15% by volume
- Application: Brush or roller
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/L
- Directive: Compliant with 2004/42/EC
Manufacturer
OEMSpecifications
- Type
- Colour
- Colour
- Grey
- Acrilyc
- No
Quantity
- Volume
- 10 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.