Berling Beto-floor concrete paint is a single-component, solvent-based alkyd-polyurethane paint for coating concrete floors, pavements, paved surfaces, plaster, bricks, and stone. It can be used indoors and outdoors and withstands moderate wear, weather changes, and the alkalinity of cement. It offers good adhesion and coverage.
Apply in two coats to clean, new surfaces. On previously painted surfaces, remove any flaking paint and apply a solvent-based primer before the two coats; if the surface is clean, the paint can be applied directly. Thin with White Spirit by up to 15% by volume, depending on the application method. Apply with a brush or roller, observing the drying and recoating times.
- Type: Single-component, solvent-based alkyd-polyurethane paint
- Colour: Green
- Volume: 750 ml
- Coverage: 9–11 m²/l, depending on the surface’s absorbency
- Touch dry: 2–4 hours
- Recoating: After 16 hours
- Thinning: White Spirit by up to 15% by volume
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC content: Up to 500 g/l
- Directive: Compliant with 2004/42/EC
- Application: With a brush or roller
- Tool cleaning: With White Spirit
- Disposal of residues: As hazardous waste
Specifications
- Type
- Colour
- Colour
- Green
- Acrilyc
- No
Quantity
- Volume
- 0.75 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.