Berling BETO-FLOOR paint is a one-component, solvent-based alkyd-polyurethane floor paint for concrete. It is suitable for concrete floors, pavements, paved surfaces, plaster, brick and stone, both indoors and outdoors. It offers good adhesion and coverage, and withstands moderate wear, weather conditions and the alkalinity of cement.
Apply two coats to new surfaces after cleaning off mud, oil and other contaminants. On previously painted surfaces, remove old, peeling paint with sandpaper, then apply one coat of Berling FIXATEUR solvent-based primer followed by two coats of paint. If the surface is clean, apply the paint directly. Thin with White Spirit by up to 15% by volume, depending on the application method, and apply with a brush or roller. Clean tools with White Spirit and dispose of any residue as hazardous waste.
- Colour: Green
- Volume: 2.5 L
- Type: One-component, solvent-based alkyd-polyurethane
- Coverage: 9–11 m²/L, depending on the surface’s absorbency
- Touch dry: 2–4 hours
- Recoat time: After 16 hours
- Thinning: White Spirit, up to 15% by volume
- Density: 1.40–1.50 g/cm³, depending on the shade
- VOC: Up to 500 g/L, in accordance with Directive 2004/42/EC
- Application tools: Brush or roller
Manufacturer
OEMSpecifications
- Type
- Colour
- Colour
- Green
- Acrilyc
- No
Quantity
- Volume
- 2.5 lt
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.