I got 2 because of the low price. It has exceeded my expectations. Very value for money. I hope it will last for quite a few pages.

It was immediately recognized by the printer as non-original. It started printing somewhat faintly and I thought it would improve after a few prints. However, over time the printing got worse and worse and left gray marks from the middle to the right. Cheap, yes, but it doesn't do the job. I do not recommend it.

I threw it away and bought from a store for 7 euros more, much better printing and without drops and smudges.

Excellent!!!!
Recognized immediately by the Brother HL-L2370DN printer
So far 2800 pages and it keeps going!!!
Value for money!!!!
Highly recommended!!!!

Brother L2310D recognized it immediately without me doing anything. This is the second toner I am buying. I don't remember how many pages the previous one printed but who cares, 4.44 euros, Highly recommended.

Along with the original genuine toner that came with the printer when I bought it, I have used 3 more of these toners. I mainly print handwritten notes from OneNote. The printer's page counter has counted a total of 7735. The current ink, although the printer indicates that it still has about 40%, is already producing very blurry prints. So it roughly yields 2000-2500 printed pages.

I just received it. After installation, it worked right away without any problems. I didn't need to make any adjustments. I simply placed it in the printer's slot. My printer (Brother HL-L2350DW) recognized it immediately as genuine. The print quality is very good. As for the number of printed pages, time will tell...

The first toner was recognized but lasted less than 500 pages until the indication that it was finished! I bought two more identical ones and it doesn't recognize them...

I use it for the MFC-L2710DW printer. It was recognized normally after I followed the toner replacement process from the printer's options. The toner levels are also visible from the relevant option in the menu. The print quality is the same as the original. I don't have an opinion yet on the number of pages it prints. I bought 2 more and the drum which I have not used yet

Absolutely compatible with the MFC-2710DW! It has saved us, we were buying compatible ones from well-known chains for a long time and paying four times the price, even though they were not the originals. The best possible solution!

I read the reviews and decided to give it a try. And I did well! For a year now we haven't changed the Toner and we print very regularly. The definition of amortization! Indeed, the printer did not recognize it as genuine the first time I put it in, but I took it out and put it back in and then everything was fine. It has also happened to me several times that it doesn't recognize it, I take it out and put it back in to print. Super value for money!

It promises 3000 prints but prints just fine for about 2000 pages, but still, for its price, it is worth it more than enough

I bought this specific toner twice. The printer I have is a Brother MFC l2750dw. The first time it recognized it as a non-genuine toner, it measured the ink levels, with good print quality until the middle, as it printed with poor quality afterwards, so I had to replace it. The second time, it didn't recognize it, it gave me the indication to replace it, so I couldn't print. The problem was easily solved by searching for instructions on the internet on how to manually disable the toner recognition. Now I print normally, it just doesn't have the ability to recognize the ink levels. The print quality is good for now. I can't know about the lifespan because I just installed it. In conclusion, I consider it worth its money, as it is very economical. I would buy it again even with the problems I mentioned above.

I haven't had it for long so I don't know the volume of prints it will produce. However, it was immediately recognized by my Brother HL-L23500W printer and the installation was very easy. Definitely worth it for this price.

No problem with its use (I am already on the 3rd compatible toner). Prints for home/light professional use. Works fine.
I would buy it again.

Today, after a while that the toner of the Brother MFC-L2710DW printer ran out, I made the change.
The change was very easy and without any problems.
The first prints were satisfactory and we all remained pleased.
The 3000 printing pages that this specific toner provides will last for a year to see when we will reach them.
I highly recommend it.

The Brother DCP-L2510D recognized it immediately as non-genuine and works flawlessly, having made approximately 1000 prints so far.

The printer recognized it immediately and after four months of household use, it has not presented any problem to me. I don't know if it will produce as many pages as it claims, but for now, it does its job.

The replacement was recognized for 20 prints and then displays the message "No Toner". For future buyers, there was no compatibility with the BROTHER MFC-L2710DW.

For home use, it is perfect. I am already on my fourth toner that I have purchased and everything worked flawlessly. Just make sure it is for your printer.

For now, everything is fine. The machine read it directly and without any problems. As for the quantity of prints, we will have to see it a little later....

Nominal performance of 3,000 pages, I bought it assuming that if it prints half of that, it will be worth the money. It printed around 2,200 pages without any issues.
It was installed in machine 2710.

It was never recognized by the printer no matter how many resets I did. I saw a video about replacing the small chip with an original Brother toner and it works perfectly! Use a screwdriver to remove the chip from the original toner and place it in the other one, making sure it has the same orientation (it takes 5 seconds). I don't have an opinion on the volume of prints because I just managed to make it work. They also sell fake Brother chips for 3 euros abroad. I hope I helped

It did not meet the printing volume for which it is sold, it gave me a message to change the toner after about 500 pages, I followed the reset process which was supposed to give me another 500 pages, but after 100 pages it does not print anymore.

In my printer MFC-L2710DW, the toner was recognized without any problem!! Its durability will be evident in the future.

I bought it in April for backup. As soon as I installed it in the HL-L2350DW, it worked perfectly. It printed 80 pages front and back. It shows that it is at 90% capacity. It recognizes it as a non-genuine toner. If it continues to work like this, it is worth the money.

After 500 prints, it dropped to 20%. Few compared to the maximum limit of 3000. However, it is still cost-effective. The print quality is very good.

Today, 05.01.23, I received the second one from the first recommended store, Skrutz. It arrived in two days. Very good packaging again. The previous one printed 600 pages. It is definitely value for money. No issues with changing the toner. No reset needed. It shows 100% full.

It was immediately recognized by the printer and the print quality was as expected. Excellent for its price. It remains to be seen whether the "3000" will be printed or if the number will be significantly reduced.

Edit: Yes 3000 pages were indeed printed. Managed expectations and low quality was used. But 3247 pages later I give them my regards.

Perfect!! It has a chip, the printer (Brother HL-L2350DW) recognized it immediately without any issue, I just plugged it in and that's it! The program also works and shows the ink level, it immediately showed that it is full! The quality is very very good, actually I didn't see any difference compared to the original, I am EXTREMELY satisfied. I will definitely buy it again.

Update 7/1/2023 The multifunction printer printed 1944 pages with this toner and gave me a message that it has low toner level (10%) even though it says it's for 3000 pages. From the 1650th page, they started to come out slightly faded.

I bought it with hesitation because I avoid anything that is OEM. So far, it works perfectly. The photocopies are in excellent condition. It worked immediately with the printer even though it recognized that it's not the genuine one from BROTHER company. It goes without saying that I will buy it again because the price difference with the OEM (which costs 35€) is significant (6€). Most likely, I will purchase the larger size. I highly recommend it.