Skroutz.eu

Karcher SP 9.000 Flat Single-phase Pump Waste Water / Sewage 0.37hp 1.645-810.0
Submersible Water Pumps

Karcher SP 9.000 Flat Single-phase Pump Waste Water / Sewage 0.37hp 1.645-810.0

Manages up to 9,000 l/h and pumps to a drainage level of 1 mm: The SP 9,000 Flat submersible pump is ideal for clean to slightly dirty water, containing pollutant particles up to 5 millimeters in...

Manages up to 9,000 l/h and pumps to a drainage level of 1 mm: The SP 9,000 Flat submersible pump is ideal for clean to slightly dirty water, containing pollutant particles up to 5 millimeters in size.

It is suitable for draining small flooded swimming pools or basements, ensuring reliable and efficient operation. A robust mechanical seal ensures a long...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Voltage

    Single-Phase

    Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    6

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
70 99 €
Delivery Thu, 25 Jun - Mon, 29 Jun
14,00 €   shipping cost
Sent from Greece
From Paleta Deals 4.8 (44)
4.8 (44 reviews)
Greece
6 pieces
See Water Pumps on the page of Paleta Deals
Product report

Description

Description

Manages up to 9,000 l/h and pumps to a drainage level of 1 mm: The SP 9,000 Flat submersible pump is ideal for clean to slightly dirty water, containing pollutant particles up to 5 millimeters in size.

It is suitable for draining small flooded swimming pools or basements, ensuring reliable and efficient operation. A robust mechanical seal ensures a long service life.

Features:

  • Float switch: Activates and deactivates the pump according to the water level, preventing dry running.
  • Quick Connect: Screw connection for quick and simple connection of hoses 1", 1 1/4", and 1 1/2".
  • Folding feet: Can be used for increased performance at water levels up to 1 mm.
  • Automatic operation: Starts operation at a water level of 7 millimeters.
  • Adjustable float switch: For modification to continuous operation.
  • Convenient handle: Comfortable to use and suitable for holding a rope.
  • Powerful and easy-to-adjust pre-filter: Protects the pump from heavy dirt and prevents the impeller from clogging.

Suitable for water damage in homes and storage facilities as well as for pumping water from pools.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.37 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
277.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (4)

Reviews

4.8
4
4.8
Review this product
  1. 3
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • vd_marame
    4
    vd_marame

    Verified purchase

    It saved me from water ingress in an apartment building storage room. But be careful! It requires a relatively small "hard" hose. When I used a soft Karcher hose, it didn't drain as it didn't have the power to "open" it and remove the water. This, combined with an attempt to drain water at a very low level.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    aemm

    Verified purchase

  • 5
    b690888

    Verified purchase

  • 5
    Georgios_Papadopoulos1849

    Verified purchase

Description & Specifications

Manages up to 9,000 l/h and pumps to a drainage level of 1 mm: The SP 9,000 Flat submersible pump is ideal for clean to slightly dirty water, containing pollutant particles up to 5 millimeters in size.

It is suitable for draining small flooded swimming pools or basements, ensuring reliable and efficient operation. A robust mechanical seal ensures a long service life.

Features:

  • Float switch: Activates and deactivates the pump according to the water level, preventing dry running.
  • Quick Connect: Screw connection for quick and simple connection of hoses 1", 1 1/4", and 1 1/2".
  • Folding feet: Can be used for increased performance at water levels up to 1 mm.
  • Automatic operation: Starts operation at a water level of 7 millimeters.
  • Adjustable float switch: For modification to continuous operation.
  • Convenient handle: Comfortable to use and suitable for holding a rope.
  • Powerful and easy-to-adjust pre-filter: Protects the pump from heavy dirt and prevents the impeller from clogging.

Suitable for water damage in homes and storage facilities as well as for pumping water from pools.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Waste Water / Sewage

Type

Waste Water / Sewage

Waste water / sewage pumps are used for pumping and transporting waste water, sewage, and other liquids containing solids or particles
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Voltage
Single-Phase

Voltage

Single-Phase

Single-phase power supply refers to the provision of electrical energy from single-phase current (e.g., 230V AC), which is the most common type of supply for residential and small commercial applications. 
Horsepower
0.37 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
277.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
6 m

Features

with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
Yes

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1", 1 1/2", 1 1/4"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
6 m

Maximum Head Height: 6


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
7 m

Materials & Construction

Set
No
Stainless
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (4)

4.8
4
4.8
Review this product
  1. 3
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • vd_marame
    4
    vd_marame

    Verified purchase

    It saved me from water ingress in an apartment building storage room. But be careful! It requires a relatively small "hard" hose. When I used a soft Karcher hose, it didn't drain as it didn't have the power to "open" it and remove the water. This, combined with an attempt to drain water at a very low level.

    Translated from Greek ·
    Did you find this review helpful?
  • 5
    aemm

    Verified purchase

  • 5
    b690888

    Verified purchase

  • 5
    Georgios_Papadopoulos1849

    Verified purchase
70,99 €
14,00 €   shipping cost