Skroutz.eu

JBM Welding Machine Inverter MMA with Maximum Welding Current 100A and Duty Cycle 15%
Welding Machines

JBM Welding Machine Inverter MMA with Maximum Welding Current 100A and Duty Cycle 15%

Suitable for welding steel and iron with all types of acid and base electrodes. Small size, lightweight, and energy-efficient. Good arc start and arc force, stable arc, and minimal spatter. High...

Suitable for welding steel and iron with all types of acid and base electrodes. Small size, lightweight, and energy-efficient. Good arc start and arc force, stable arc, and minimal spatter. High welding quality, deep penetration. Automatic protection against overvoltage, overcurrent, and overheating. IGBT technology significantly improves the machine's...

See full description See full description

Top specs

  • Welding Current

    100

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    3.7

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
127 31 €
Delivery Fri, 18 Sep - Tue, 22 Sep
14,00 €   shipping cost
Sent from Greece
From Niparts
Greece
20+ pieces
See Tools on the page of Niparts

Learn more about invoicing
Review the product
Product report

Description

Description

Suitable for welding steel and iron with all types of acid and base electrodes. Small size, lightweight, and energy-efficient. Good arc start and arc force, stable arc, and minimal spatter. High welding quality, deep penetration. Automatic protection against overvoltage, overcurrent, and overheating. IGBT technology significantly improves the machine's reliability. Can automatically balance when input voltage fluctuates.

  • Input Category: 1ph AC 230V, 50/60Hz
  • Nominal Input Capacity: 3.7KVA
  • Maximum Input Current: 16A
  • No-Load Voltage: 65V
  • Maximum Rated Output: 100A/24V
  • Output Current Range: 10-100A
  • Duty Cycle: 15%
  • Efficiency: 85%
  • Power Factor: 0.7
  • Protection Category: IP21S
  • Insulation Category: F
  • Usable Electrode: 1.0 - 3.2mm
  • Machine Weight: 2.5kgs / 3.5kgs
  • Machine Size (LxWxH): 200x80x130mm
  • Packing Size (LxWxH): 260x210x200mm

Includes:

  • Electrode handle with 2m cable
  • Earth clamp with 1.5m cable
  • Brush hammer
  • Tinted protective mask

IGBT INVERTER TECHNOLOGY MMA DC ANTI STICK ARC FORCE HOT ARC START

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
100 A

Welding Current (max): 100


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
15 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
3.7 kVA

Power: 3.7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Suitable for welding steel and iron with all types of acid and base electrodes. Small size, lightweight, and energy-efficient. Good arc start and arc force, stable arc, and minimal spatter. High welding quality, deep penetration. Automatic protection against overvoltage, overcurrent, and overheating. IGBT technology significantly improves the machine's reliability. Can automatically balance when input voltage fluctuates.

  • Input Category: 1ph AC 230V, 50/60Hz
  • Nominal Input Capacity: 3.7KVA
  • Maximum Input Current: 16A
  • No-Load Voltage: 65V
  • Maximum Rated Output: 100A/24V
  • Output Current Range: 10-100A
  • Duty Cycle: 15%
  • Efficiency: 85%
  • Power Factor: 0.7
  • Protection Category: IP21S
  • Insulation Category: F
  • Usable Electrode: 1.0 - 3.2mm
  • Machine Weight: 2.5kgs / 3.5kgs
  • Machine Size (LxWxH): 200x80x130mm
  • Packing Size (LxWxH): 260x210x200mm

Includes:

  • Electrode handle with 2m cable
  • Earth clamp with 1.5m cable
  • Brush hammer
  • Tinted protective mask

IGBT INVERTER TECHNOLOGY MMA DC ANTI STICK ARC FORCE HOT ARC START

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
MMA

Type

MMA

Creates thick and strong bonds without the need for external gas supply, making it ideal for out-of-lab welding.
Welding Current (max)
100 A

Welding Current (max): 100


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
15 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
3.7 kVA

Power: 3.7


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
Maximum Electrode Diameter
3.2 mm

Maximum Electrode Diameter: 3.2


The maximum electrode thickness that the machine can support, depending on the maximum current it can provide.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
Yes

Anti Stick


Cuts off the current if the electrode sticks to the metal, to prevent it from burning.
Arc Force
Yes

Arc Force


Helps in the stability of the arc during welding.
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

127,31 €
14,00 €   shipping cost