Skroutz.eu

FFG Powercut 50k Plasma Cutting Inverter 20A
Welding Machines

FFG Powercut 50k Plasma Cutting Inverter 20A

POWERCUT 50K Plasma Cutting Inverter Machine

Specifications

  • Nominal voltage: 230 V ~ 1 Ph | 50 Hz
  • Type: Plasma
  • Output current range: 15 - 50 A
  • Power: 7.6 kVA
  • Nominal input current: 33 A
  • No-load...

POWERCUT 50K Plasma Cutting Inverter Machine

Specifications

  • Nominal voltage: 230 V ~ 1 Ph | 50 Hz
  • Type: Plasma
  • Output current range: 15 - 50 A
  • Power: 7.6 kVA
  • Nominal input current: 33 A
  • No-load voltage (Uo): 293 V
  • Gas flow: 300 L/min
  • Air pressure: 3 - 6 bar
  • Gas delay time: 5-10 s
  • Max. cutting thickness: 15 mm
  • Cooling type: Air
  • Duty cycle: 20%: 50A | 60%:...
See full description See full description

Top specs

  • Welding Current

    20

    Suitable for use on thin sheets and DIY constructions.

  • Duty Cycle

    The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

    2.

    For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.

  • Power Supply Voltage

    230

    It is the supply voltage that the machine requires from the electrical grid.

  • Power

    7.6

    Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.
  • See all
627 00 €
Delivery Thu, 17 Sep - Mon, 21 Sep
14,00 €   shipping cost
Sent from Greece
From MdTools 5.0 (45)
5.0 (45 reviews)
Greece
See Tools on the page of MdTools

Learn more about invoicing
Review the product
Product report

Description

Description

POWERCUT 50K Plasma Cutting Inverter Machine

Specifications

  • Nominal voltage: 230 V ~ 1 Ph | 50 Hz
  • Type: Plasma
  • Output current range: 15 - 50 A
  • Power: 7.6 kVA
  • Nominal input current: 33 A
  • No-load voltage (Uo): 293 V
  • Gas flow: 300 L/min
  • Air pressure: 3 - 6 bar
  • Gas delay time: 5-10 s
  • Max. cutting thickness: 15 mm
  • Cooling type: Air
  • Duty cycle: 20%: 50A | 60%: 29A | 100%: 20A
  • Protection level: IP21S
  • Cable: 2.5 m
  • Dimensions (LxWxH): 44.0x17.5x34.0 cm
  • Weight: 11.0 kg

Description

High-performance Plasma Inverter Cutting Machine using compressed air as the ionization medium. Multi-process new generation advanced IGBT technology. Ampere (A) adjustment potentiometer, thermal protection (THERMAL PROTECTION), machine quick connectors 10 - 25. Fully digital and user-friendly control panel and display. Easily accessible gas regulator. Complies with: EN IEC 60974-1 and EN IEC 60974-10. Enclosure protection IP21S. Small, lightweight body. Ergonomic carrying handle. Suitable for use with a generator.

Included

  • Plasma torch with rubber coating 5m (BINZEL P80)
  • Ground clamp 4mx16mm² with clamp and 10-25 quick connection
  • Compressed air hose 4m with connection
  • 3 nozzles (1.1 x2)
  • 2 clamps (10-16mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
20 A

Welding Current (max): 20


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
50 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7.6 kVA

Power: 7.6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

POWERCUT 50K Plasma Cutting Inverter Machine

Specifications

  • Nominal voltage: 230 V ~ 1 Ph | 50 Hz
  • Type: Plasma
  • Output current range: 15 - 50 A
  • Power: 7.6 kVA
  • Nominal input current: 33 A
  • No-load voltage (Uo): 293 V
  • Gas flow: 300 L/min
  • Air pressure: 3 - 6 bar
  • Gas delay time: 5-10 s
  • Max. cutting thickness: 15 mm
  • Cooling type: Air
  • Duty cycle: 20%: 50A | 60%: 29A | 100%: 20A
  • Protection level: IP21S
  • Cable: 2.5 m
  • Dimensions (LxWxH): 44.0x17.5x34.0 cm
  • Weight: 11.0 kg

Description

High-performance Plasma Inverter Cutting Machine using compressed air as the ionization medium. Multi-process new generation advanced IGBT technology. Ampere (A) adjustment potentiometer, thermal protection (THERMAL PROTECTION), machine quick connectors 10 - 25. Fully digital and user-friendly control panel and display. Easily accessible gas regulator. Complies with: EN IEC 60974-1 and EN IEC 60974-10. Enclosure protection IP21S. Small, lightweight body. Ergonomic carrying handle. Suitable for use with a generator.

Included

  • Plasma torch with rubber coating 5m (BINZEL P80)
  • Ground clamp 4mx16mm² with clamp and 10-25 quick connection
  • Compressed air hose 4m with connection
  • 3 nozzles (1.1 x2)
  • 2 clamps (10-16mm)

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Plasma Cutting

Type

Plasma Cutting

It uses compressed air to cut almost any type of metal with speed and precision. At 50A, it can cut metal up to 2.5cm thick. 2. It is mainly used by specialized personnel in workshops (e.g. car repairs).
Welding Current (max)
20 A

Welding Current (max): 20


Suitable for use on thin sheets and DIY constructions.
Operation Cycle (max Ampere)
50 %

Operation Cycle (max Ampere)

The Duty Cycle is the portion of a ten-minute period that a welding machine can operate continuously at maximum Amperes before it needs to stop and cool down.

2.

For example, a welding machine with a maximum Amperage of 200 A and a Duty Cycle of 30% can operate continuously at 200 A for 3 minutes before it needs to stop.
Supply Voltage
230 V

Supply Voltage: 230


It is the supply voltage that the machine requires from the electrical grid.
Power
7.6 kVA

Power: 7.6


Affects the power consumption of the machine and determines if it can be supported by the electrical network you are using.

Additional Features

Inverter
Yes

Inverter


New technology welding. Very good in terms of performance, durability, and weight, but with a high cost of repair in case of damage. They have automation for better and safer work. If connected to a generator, it is recommended to choose one with 8kVA or more.
IGBT
Yes

IGBT


Allows the conversion of direct current (DC) voltage to alternating current (AC) or the output of direct current at a higher or lower intensity.
VRD
No
with Voltage Stabilizer
No
for Generator with AVR
No

Features

Hot Start
No
Anti Stick
No
Arc Force
No
2T Operation
No
4T Mode
No
Spot Function
No
Pulsed
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

627,00 €
14,00 €   shipping cost