Skroutz.eu

Plus Pool Water Pump Filter Single-Phase With Power 3hp
Pool Water Pumps

Plus Pool Water Pump Filter Single-Phase With Power 3hp

Key features:

  • Maximum Flow Rate: 24000 liters/hour
  • Power Supply: 220V/50Hz
  • Maximum Head: 20m
  • Inlet/Outlet: 2" x 2"
  • For pools up to 180m³
See full description
  • Item Filter

  • Power

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
  • Pool Size Large Residential (90 to 140 m³)

  • Power Supply

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.

  • Manometric Head (Max)

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

  • Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.
  • Pump Weight 5.5 kg
  • See all
Product report

Description

Description

Pool pump specially designed for small and large pools, quiet for long-term operation. It features a built-in pre-filter which, thanks to its high filtration capacity, neutralizes the risk of pump blockage and minimizes the frequency of necessary maintenance.

Features

Made from high-quality materials, plastic pump body and special anti-rust support, impeller made of Noryl plastic and shaft made of stainless steel AISI 304.

Pool pump with 2HP pre-filter, self-priming centrifugal pump, with pre-filter suitable for pool circulation and filtration, especially where high flow is needed. The water inlet and outlet ports are 2" x 2" in diameter with a maximum flow rate of 19.2m³/h, the maximum head height it can lift water is 19m. Recommended for pools up to 180m³. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

At a glance

  • Maximum Flow Rate: 24000 liters/hour
  • Power Supply: 220V/50Hz
  • Maximum Head: 20m
  • Inlet/Outlet: 2" x 2"
  • For pools up to 180m³
  • Power: 3.0 HP 
  • Material: Plastic Pump Body
  • Impeller Material: Plastic
  • Shaft: Stainless Steel AISI304
  • Full Copper Winding
  • Includes pre-filter with plastic mesh
  • Inspection cover with retaining screws
  • Sealed with ceramic & graphite
  • Compact and easy-to-use design
  • Motor thermal protection



    Manufacturer

    Manufacturer Details

    Warnings & Safety Information
    See full description

    Specifications

    Specifications

    Main Specifications

    Type
    Filter
    Power (hp)
    3 hp

    Power (hp)

    Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
    Power (Watt)
    2200 W
    Power Source
    Single-Phase

    Power Source

    Single-Phase

    Operates with standard household electricity (230V). It is suitable for residential pools.
    Motor Type
    Constant Speed

    Motor Type

    Constant Speed

    The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
    Suitable for Saltwater
    No

    Suitable for Saltwater

    Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
    Pool Size
    Large Residential (90 to 140 m³)
    Pump Weight
    5.5 kg
    Filter Included
    No

    Performance

    Maximum Head of a Pump
    30 m

    Maximum Head of a Pump

    Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

    Installation

    Connection Nozzle
    50 mm

    Connection Nozzle

    Indicates the diameter of the pipe that can be connected to the pump.

    • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
    • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

    Tip: Check the diameter of your existing pipes before making a selection.

    Important information

    Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

    See all specifications

    Reviews (3)

    Reviews

    3.7
    3
    3.7
    Review this product
    1. 2
    2. 4 stars
      0
    3. 3 stars
      0
    4. 2 stars
      0
    5. 1
    Review this product

    Description & Specifications

    Pool pump specially designed for small and large pools, quiet for long-term operation. It features a built-in pre-filter which, thanks to its high filtration capacity, neutralizes the risk of pump blockage and minimizes the frequency of necessary maintenance.

    Features

    Made from high-quality materials, plastic pump body and special anti-rust support, impeller made of Noryl plastic and shaft made of stainless steel AISI 304.

    Pool pump with 2HP pre-filter, self-priming centrifugal pump, with pre-filter suitable for pool circulation and filtration, especially where high flow is needed. The water inlet and outlet ports are 2" x 2" in diameter with a maximum flow rate of 19.2m³/h, the maximum head height it can lift water is 19m. Recommended for pools up to 180m³. Installation should be done in well-ventilated areas, protected from extreme weather conditions.

    At a glance

    • Maximum Flow Rate: 24000 liters/hour
    • Power Supply: 220V/50Hz
    • Maximum Head: 20m
    • Inlet/Outlet: 2" x 2"
    • For pools up to 180m³
    • Power: 3.0 HP 
    • Material: Plastic Pump Body
    • Impeller Material: Plastic
    • Shaft: Stainless Steel AISI304
    • Full Copper Winding
    • Includes pre-filter with plastic mesh
    • Inspection cover with retaining screws
    • Sealed with ceramic & graphite
    • Compact and easy-to-use design
    • Motor thermal protection



      Manufacturer

      Manufacturer Details

      Warnings & Safety Information

      Main Specifications

      Type
      Filter
      Power (hp)
      3 hp

      Power (hp)

      Indicates how much power the motor has to move water in the pool. The greater the resistance in the pool circuit (pipes, filters, elevation), the more the water flow that the pump can provide is reduced.
      Power (Watt)
      2200 W
      Power Source
      Single-Phase

      Power Source

      Single-Phase

      Operates with standard household electricity (230V). It is suitable for residential pools.
      Motor Type
      Constant Speed

      Motor Type

      Constant Speed

      The classic and most economical option. It always operates at 100% of its power, providing stable and reliable water circulation, but with higher electricity consumption and noise.
      Suitable for Saltwater
      No

      Suitable for Saltwater

      Necessary if your pool uses a salt chlorinator. These pumps feature reinforced materials with high resistance to corrosion from saltwater.
      Pool Size
      Large Residential (90 to 140 m³)
      Pump Weight
      5.5 kg
      Filter Included
      No

      Performance

      Maximum Head of a Pump
      30 m

      Maximum Head of a Pump

      Indicates how "high" the pump can push the water, measured in meters. For example, if it says "max head 15 m," it means that the pump can theoretically raise the water up to a height of 15 meters.

      Installation

      Connection Nozzle
      50 mm

      Connection Nozzle

      Indicates the diameter of the pipe that can be connected to the pump.

      • The 32 mm & 38 mm sizes are usually used for small, flexible pipes (above-ground or inflatable pools).
      • The 50 mm & 63 mm sizes are for rigid PVC pipes (classic domestic or built-in pools).

      Tip: Check the diameter of your existing pipes before making a selection.

      Important information

      Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

      Reviews (3)

      3.7
      3
      3.7
      Review this product
      1. 2
      2. 4 stars
        0
      3. 3 stars
        0
      4. 2 stars
        0
      5. 1
      Review this product
      179,80 €
      23,00 €   shipping cost