Normal UV Resin

The material is hard and durable. The strong material in the shovel model can easily lead to breakage of the model, but very flexible material is prone to stress distortion or breakage of the printing details, which will affect the precise shaping and aesthetics. The resin is stable under different climatic conditions and is also easy to store, overcoming the weaknesses of other resins that are susceptible to moisture and environmental corrosion.

Professional LCD Formulation Resin

The resin has been optimized for low-light LCD exposure, and its printing performance is higher than that of compatible DLP / LCD / SLA resins in the market. The resin is designed exclusively for LCD models and is not recommended for use in DLP or SLA machines. This resin ensures the strength of the molded parts and exhibits minimal shrinkage while improving printing speed, reducing curing time, and enhancing the printing performance of LCD machines as much as possible.

Good Adhesion and Easy Release

Not only does it have a high success rate in printing and accuracy, but it also minimizes the force required to release the resin and adhesion, so that the model stuck to the molding platform can be easily removed, and the low viscosity facilitates cleaning of the machine and model.

Storage Method:

• Keep away from light, sealed at room temperature.
• It is recommended to store in an environment of 15 ℃ -35 ℃; the lower the temperature, the higher the viscosity of the resin.
• Sealed storage; excessive dust or moisture can affect printing quality.

Usage:

• Shake well before use; do not use resin in areas with a lot of sunlight.
• Wear gloves before use to avoid direct contact with skin and keep the room ventilated.
• In case of accidental contact, wash immediately with plenty of water. If you feel unwell, seek immediate medical attention.
• Printed models need to be cleaned with high-concentration alcohol for about 30 seconds (recommended concentration of 95% or higher).
• Do not pour unused resin from the resin container back into the resin; do not leave resin in the resin container for a long time without use.
• The resin has a shelf life of up to 18 months.