Skroutz.eu

Unitek V1609A KVM & Data Switch With USB
KVM & Data Switch

Unitek V1609A KVM & Data Switch With USB

The Unitek V1609A KVM and data switch connects two DisplayPort devices to one monitor, or one device to two monitors, without simultaneous operation on both outputs. It supports resolutions up to 8K...

The Unitek V1609A KVM and data switch connects two DisplayPort devices to one monitor, or one device to two monitors, without simultaneous operation on both outputs. It supports resolutions up to 8K at 60 Hz or 4K at 120 Hz, and switching is done at the press of a button.

It supports a USB-C to DisplayPort adapter on the inputs and a DisplayPort to HDMI...

See full description See full description

Learn more about invoicing
Product report

Description

Description

The Unitek V1609A KVM and data switch connects two DisplayPort devices to one monitor, or one device to two monitors, without simultaneous operation on both outputs. It supports resolutions up to 8K at 60 Hz or 4K at 120 Hz, and switching is done at the press of a button.

It supports a USB-C to DisplayPort adapter on the inputs and a DisplayPort to HDMI adapter on the outputs. It is powered via USB-A to USB-C at 5 V/2 A.

  • Connectivity: USB
  • DisplayPort inputs: 2
  • DisplayPort outputs: 1
  • Resolution: up to 7680 × 4320 at 60 Hz or 4K at 120 Hz
  • Features: bidirectional operation
  • Power supply: USB-A to USB-C, 5 V/2 A

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Connectivity
USB
Resolution
7680x4320
Features
Bidirectional

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (1)

Reviews

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Antonis3d
    4
    5 out of 5 members found this review helpful
    Antonis3d

    Verified purchase

    In terms of material quality, it's cheap but does its job just fine. I have it connected to a MacBook M4 Pro, Dell dock + PC. It can also work to connect one device to two monitors (bi-directional).

    You need to pay attention to the following for it to work properly, otherwise your screen will flicker/blink:

    1. Use high-quality DisplayPort 1.4+ cables (I used Ugreen 8k60hz DP 2.0)
    2. The total length of the cables should be less than 3 meters, e.g., the two cables from the sources to the Unitek should be 2 meters each + from the Unitek to the monitor 1 meter. This is also mentioned in the package instructions.
    3. It needs power supply with a 5V2A charger, e.g., a common phone charger which is not included in the package.

    Translated from Greek ·
    Did you find this review helpful?
  • Antonis3d
    4
    Antonis3d

    In terms of material quality, it's cheap but does its job just fine. I have it connected to a MacBook M4 Pro, Dell dock + PC. It can also work to connect one device to two monitors (bi-directional).

    You need to pay attention to the following for it to work properly, otherwise your screen will flicker/blink:

    1. Use high-quality DisplayPort 1.4+ cables (I used Ugreen 8k60hz DP 2.0)
    2. The total length of the cables should be less than 3 meters, e.g., the two cables from the sources to the Unitek should be 2 meters each + from the Unitek to the monitor 1 meter. This is also mentioned in the package instructions.
    3. It needs power supply with a 5V2A charger, e.g., a common phone charger which is not included in the package.

    Translated from Greek ·
    5
  • See all

Description & Specifications

The Unitek V1609A KVM and data switch connects two DisplayPort devices to one monitor, or one device to two monitors, without simultaneous operation on both outputs. It supports resolutions up to 8K at 60 Hz or 4K at 120 Hz, and switching is done at the press of a button.

It supports a USB-C to DisplayPort adapter on the inputs and a DisplayPort to HDMI adapter on the outputs. It is powered via USB-A to USB-C at 5 V/2 A.

  • Connectivity: USB
  • DisplayPort inputs: 2
  • DisplayPort outputs: 1
  • Resolution: up to 7680 × 4320 at 60 Hz or 4K at 120 Hz
  • Features: bidirectional operation
  • Power supply: USB-A to USB-C, 5 V/2 A

Manufacturer

Manufacturer Details

Warnings & Safety Information
Connectivity
USB
Resolution
7680x4320
Features
Bidirectional

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (1)

4.0
1
4.0
Review this product
  1. 5 stars
    0
  2. 1
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Antonis3d
    4
    5 out of 5 members found this review helpful
    Antonis3d

    Verified purchase

    In terms of material quality, it's cheap but does its job just fine. I have it connected to a MacBook M4 Pro, Dell dock + PC. It can also work to connect one device to two monitors (bi-directional).

    You need to pay attention to the following for it to work properly, otherwise your screen will flicker/blink:

    1. Use high-quality DisplayPort 1.4+ cables (I used Ugreen 8k60hz DP 2.0)
    2. The total length of the cables should be less than 3 meters, e.g., the two cables from the sources to the Unitek should be 2 meters each + from the Unitek to the monitor 1 meter. This is also mentioned in the package instructions.
    3. It needs power supply with a 5V2A charger, e.g., a common phone charger which is not included in the package.

    Translated from Greek ·
    Did you find this review helpful?
  • Antonis3d
    4
    Antonis3d

    In terms of material quality, it's cheap but does its job just fine. I have it connected to a MacBook M4 Pro, Dell dock + PC. It can also work to connect one device to two monitors (bi-directional).

    You need to pay attention to the following for it to work properly, otherwise your screen will flicker/blink:

    1. Use high-quality DisplayPort 1.4+ cables (I used Ugreen 8k60hz DP 2.0)
    2. The total length of the cables should be less than 3 meters, e.g., the two cables from the sources to the Unitek should be 2 meters each + from the Unitek to the monitor 1 meter. This is also mentioned in the package instructions.
    3. It needs power supply with a 5V2A charger, e.g., a common phone charger which is not included in the package.

    Translated from Greek ·
    5
  • See all
33,90 €
14,00 €   shipping cost