Water-based wood putty, suitable for correcting defective areas of wood, such as holes, joints, dents, cracks, veneer breaks, etc. It dries quickly and hard, sands easily, and applies without staining the wood surface.

Surface preparation:

• Clean the surface of dust, grease, oils, flaking old paint, rust, mold, or moisture residues.
• Apply the product with a spatula at the desired location.
• If the defects are very deep, putty more than once.
• If the putty has hardened, dilute with a little water or alcohol.
• XYLOFINE wood putty sands, mills, files, saws, planes, drills, and turns very easily.
• After use, keep the can tightly closed.

Application conditions:

Avoid applying the product at temperatures below 6°C and above 40°C and when the relative humidity is greater than 80%. Adverse conditions during application can alter the final properties of the product.

Application tools:

Spatula. After work, clean the tools with warm water and soap. Do not discharge wash liquids into the aquifer.

Drying: 10 - 30 minutes depending on application conditions.