Skroutz.eu

Gardena Water Pump 0.73hp 01766-20
Submersible Water Pumps

Gardena Water Pump 0.73hp 01766-20

The GARDENA 4700/2 stainless steel automatic rain pump is ideal for watering the garden with rainwater from a barrel. It is suitable for connecting to sprinklers, showers, or micro-drip systems...

The GARDENA 4700/2 stainless steel automatic rain pump is ideal for watering the garden with rainwater from a barrel. It is suitable for connecting to sprinklers, showers, or micro-drip systems through its telescopic pipe.

Features:

  • Built-in dirt filter for easy cleaning.
  • Dry-running protection to reduce the risk of damage.
  • Telescopic pipe adjustment from...
See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    23

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

The GARDENA 4700/2 stainless steel automatic rain pump is ideal for watering the garden with rainwater from a barrel. It is suitable for connecting to sprinklers, showers, or micro-drip systems through its telescopic pipe.

Features:

  • Built-in dirt filter for easy cleaning.
  • Dry-running protection to reduce the risk of damage.
  • Telescopic pipe adjustment from 760 mm to 960 mm.
  • Water quantity adjustment or ability to turn off via a convenient handle.
  • Electronic pressure switch and flow sensor for automatic operation.
  • Suitable for watering with larger sprinklers, syringes, and micro-drip systems.

Technical specifications:

  • Type: submersible pump / pressure pump.
  • Capacity: 4700 liters / hour.
  • Pressure: 2.3 bar.
  • Maximum discharge height: 23 meters.
  • Maximum submersion depth: 7 meters.
  • Maximum delivery temperature: 35 °C.
  • External connection thread: 1" (33.3 mm).
  • Weight: 7.1 kg.
  • Dimensions: width 150 mm x height 800 mm x length 150 mm.

The pump features a stainless steel casing and has an IP X8 protection rating.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
23 m

Maximum Head Height: 23


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

The GARDENA 4700/2 stainless steel automatic rain pump is ideal for watering the garden with rainwater from a barrel. It is suitable for connecting to sprinklers, showers, or micro-drip systems through its telescopic pipe.

Features:

  • Built-in dirt filter for easy cleaning.
  • Dry-running protection to reduce the risk of damage.
  • Telescopic pipe adjustment from 760 mm to 960 mm.
  • Water quantity adjustment or ability to turn off via a convenient handle.
  • Electronic pressure switch and flow sensor for automatic operation.
  • Suitable for watering with larger sprinklers, syringes, and micro-drip systems.

Technical specifications:

  • Type: submersible pump / pressure pump.
  • Capacity: 4700 liters / hour.
  • Pressure: 2.3 bar.
  • Maximum discharge height: 23 meters.
  • Maximum submersion depth: 7 meters.
  • Maximum delivery temperature: 35 °C.
  • External connection thread: 1" (33.3 mm).
  • Weight: 7.1 kg.
  • Dimensions: width 150 mm x height 800 mm x length 150 mm.

The pump features a stainless steel casing and has an IP X8 protection rating.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Well, Rainwater

Type

Well
They are designed to pump water from underground sources when the water is at a depth, and are mainly used for water supply, irrigation, and other applications in areas that do not have easy access to surface water.
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
0.73 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
547.5 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.
Cable Length
10 m

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Outlet Nozzle
1"

Outlet Nozzle

The outlet nozzle refers to the point or the external diameter of the pump from which the pumped water or liquid exits. It is an important feature for determining the connection of the pump with the piping system and affects the flow capacity of the liquid.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
23 m

Maximum Head Height: 23


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Pump Submersion Depth
10 m
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes
Protection Certification
IPX8

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.