Skroutz.eu

Pedrollo 4SR8/13 Pump Drilling (without Motor) Pump Pump 49480813WI5
Submersible Water Pumps

Pedrollo 4SR8/13 Pump Drilling (without Motor) Pump Pump 49480813WI5

Clean water pump suitable for residential, municipal, or industrial use.

Thanks to the floating impellers, it is possible to pump water with sand up to 200g/m³.

Suitable for:

  • Irrigation
  • Pressure...

Clean water pump suitable for residential, municipal, or industrial use.

Thanks to the floating impellers, it is possible to pump water with sand up to 200g/m³.

Suitable for:

  • Irrigation
  • Pressure systems

Type: 4SR8/13 F - HYD

Pump Type: Radial flow

Power Supply: Electric current

For borehole diameter (Inch-mm): 4"-100mm

Power (hp-Watt): 3Hp-2200Watt

Use:...

See full description See full description

  • Horsepower

    Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).

  • Power

    It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

  • Manometric Height

    81

    The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

    • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
    • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
  • See all
The product is not available for shipping to the selected country.
Review the product
Product report

Description

Description

Clean water pump suitable for residential, municipal, or industrial use.

Thanks to the floating impellers, it is possible to pump water with sand up to 200g/m³.

Suitable for:

  • Irrigation
  • Pressure systems

Type: 4SR8/13 F - HYD

Pump Type: Radial flow

Power Supply: Electric current

For borehole diameter (Inch-mm): 4"-100mm

Power (hp-Watt): 3Hp-2200Watt

Use: Clean water

Discharge outlet diameter Φ (Inch-mm): 2"-50mm

Max Head (M): 91.00

Max Flow Rate (m3/h): 12.00

Body material: Stainless steel AISI 304

Impeller material: Plastic (NORYL)

Fluid temperature (°C): 35

Additional features: Features a floating impeller

Net weight (Kg): 6.00

Product length (cm): 9.80

Product width (cm): 9.80

Product height (cm): 60.10

Max sand content (g/m3): 200

Max RPM: 2900

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
3 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2250 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
81 m

Maximum Head Height: 81


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Clean water pump suitable for residential, municipal, or industrial use.

Thanks to the floating impellers, it is possible to pump water with sand up to 200g/m³.

Suitable for:

  • Irrigation
  • Pressure systems

Type: 4SR8/13 F - HYD

Pump Type: Radial flow

Power Supply: Electric current

For borehole diameter (Inch-mm): 4"-100mm

Power (hp-Watt): 3Hp-2200Watt

Use: Clean water

Discharge outlet diameter Φ (Inch-mm): 2"-50mm

Max Head (M): 91.00

Max Flow Rate (m3/h): 12.00

Body material: Stainless steel AISI 304

Impeller material: Plastic (NORYL)

Fluid temperature (°C): 35

Additional features: Features a floating impeller

Net weight (Kg): 6.00

Product length (cm): 9.80

Product width (cm): 9.80

Product height (cm): 60.10

Max sand content (g/m3): 200

Max RPM: 2900

Manufacturer

Manufacturer Details

Warnings & Safety Information

Dimensions

Type
Drilling

Type

Drilling
Drilling pumps are used for pumping water or other liquids from underground boreholes (water sources) to surfaces for various purposes, such as water supply, irrigation, industrial applications
Power Source
Electric

Power Source

Electric
The power supply refers to the pump's need for electrical energy from an external power source, such as single-phase or three-phase power.
Horsepower
3 hp

Horsepower

Horsepower indicates the kinetic power of the pump. Higher horsepower means more efficiency in water pumping, affecting the flow (l/h) and the head (m).
Power
2250 W

Power

It is the energy consumed by the motor to pump water. The greater the power, the more effectively it can lift and move water, especially over long distances or heights.

Features

Electronic Level Sensor
No

Electronic Level Sensor

It automatically activates the pump without the classic hanging float switch. It is ideal for narrow spaces and pits, as there is no risk of it getting stuck anywhere and flooding the area.
with Cutter Impeller
No

with Cutter Impeller

Components that chop, "cut" solid materials, such as organic waste or other particles, before they pass into the pump. They are mainly used in sewage or dirty water pumps, preventing clogging or damage to the system.
Float switch
No

Float switch

It is a mechanism that automatically controls the operation of the pump. When the water level reaches a predetermined height, the float activates the pump.
Vortex
No

Vortex

The vortex system in submersible water pumps uses vortex technology to create a rotating water current, which helps in the efficient transfer of water, even when it contains particles or solids.

Pumping Specifications

Maximum Head Height
81 m

Maximum Head Height: 81


The Maximum Head Height refers to the maximum height at which the pump can lift water against resistance (such as pipes or filters). As the head height increases, the pump's flow rate decreases.

  • The maximum head height is considered by manufacturers to be the point where the water will just barely reach.
  • The maximum performance is considered by manufacturers to be the water flow at 0-1 meter head height.
Shallow Suction
No

Shallow Suction

This function allows the pump to suck water from an extremely low level (up to 1-3 mm), ideal for flooded floors and basements.

Materials & Construction

Set
No
Stainless
Yes

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.