Motorcycle Tire Repair Kit with 5 SLIME vulcanizing tire plugs. Dimensions: 5mm x 5mm x 100mm. Suitable for use on cars, ATVs, and trailers.

• Usage Procedure:
• Remove any puncturing objects.
• Use the rasp tool on the hole by sliding it up and down to roughen and clean the inside of the hole.
• Remove the plug material from the protective cover and apply it to the tip of the needle.
• Insert the plug into the puncture until the plug reaches approximately 2/3 of the hole.
• Pull the needle straight out quickly without twisting it.
• Cut off the excess plug material.
• Inflate the tire again to the recommended pressure and check for air leaks by applying a few drops of soapy water to the repaired area.
• If bubbles appear, repeat the process.

Warning: This kit is for emergency tire repairs so vehicles can be driven to a repair center for proper repairs. It is not intended for use on severe tire damage. Repairs are only made on the tread area and are not allowed on the bead, sidewalls, or sidewalls of tires.

Exercise extreme caution when using tools to avoid injury. It is recommended to wear safety glasses during tire repair.

Made in China.