Skroutz.eu

TP-LINK Deco X20 4G v1 WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)
Access Points

TP-LINK Deco X20 4G v1 WiFi Mesh Network Access Point Wi‑Fi 6 Dual Band (2.4 & 5GHz)

Key features:

  • Dual Band (2.4 & 5GHz)
  • Maximum WLAN Speed: 1800 Mbps
  • LAN Speed: 1000 Mbps
  • Wi‑Fi 6
  • RJ45 Ports: 2
  • WiFi Mesh
See full description

  • Maximum WLAN Speed

    Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.

  • Ethernet Ports

    Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.

  • Frequency

    The frequencies at which the Access Point can transmit.
    2. Additional frequencies allow for greater speed on more devices.

    Dual Band (2.4 & 5GHz)

    They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.

  • Wi-Fi Generation

    Wi‑Fi 6

    The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

    Ideal for homes with many smart devices.

    Compatible with all previous generations.
  • See all

Network version

  1. v1

    from 162,00 €

  2. v2

    from 199,89 €

165 00 €
Delivery Wed, 24 Jun - Fri, 26 Jun
14,00 €   shipping cost
Sent from Greece
From Nok-Shop 5.0 (18)
5.0 (18 reviews)
Greece
4 pieces
See Networking on the page of Nok-Shop
Product report

Description

Description

Connect more devices: Quadruple capacity with OFDMA and MU-MIMO technology for simultaneous transmission to more devices. Enhanced seamless coverage: Ensure seamless coverage of the entire home with a cleaner and stronger Wi-Fi signal produced by Wi-Fi 6.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
3000 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.

General Characteristics

Placement
Indoor
Ethernet Ports
3

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Reviews (7)

Reviews

4.7
7
4.7
Review this product
  1. 5
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Operational stability
  • Ease of installation
  • Speed
  • Range
  • Value for money
  • a3_mike
    5
    a3_mike

    Verified purchase

    The X-20 replaced an M4R, as well as the provider's 4G router, giving me full remote management capability. It works perfectly with the other Decos in the setup (1 M4R, 1 M5, and one M3W). The only note is that if you select Ethernet Backhaul via a switch with loop detection functionality (e.g., TL-SG105), it should be disabled as the X20 creates a momentary loop during reboot, causing the switch to block the port.

    Translated from Greek ·
    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
    Did you find this review helpful?
  • ecobriq
    5
    1 out of 1 members found this review helpful
    ecobriq

    Verified purchase

    Very easy to install, very easy to set up, enjoyable application. We use it as a mobile router. So far, we haven't had any issues.

    Translated from Greek ·
    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
    Did you find this review helpful?
  • 5
    fanisvalvis

    Verified purchase

    This review is about the network version: v2

  • 5
    akis_k

    Verified purchase

  • 4
    John_Xelonas

    Verified purchase

    • Operational stability
    • Ease of installation
    • Range
    • Speed
    • Value for money
  • 4
    Panagiotis_Bisarakis

    Verified purchase

    • Operational stability
    • Speed
    • Ease of installation
    • Range
    • Value for money
  • 5
    Athanasios_Vellios

    Verified purchase

    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
  • a3_mike
    5
    a3_mike

    The X-20 replaced an M4R, as well as the provider's 4G router, giving me full remote management capability. It works perfectly with the other Decos in the setup (1 M4R, 1 M5, and one M3W). The only note is that if you select Ethernet Backhaul via a switch with loop detection functionality (e.g., TL-SG105), it should be disabled as the X20 creates a momentary loop during reboot, causing the switch to block the port.

    Translated from Greek ·
    0
  • ecobriq
    5
    ecobriq

    Very easy to install, very easy to set up, enjoyable application. We use it as a mobile router. So far, we haven't had any issues.

    Translated from Greek ·
    1
  • 5
    fanisvalvis

    0
  • 5
    akis_k

    0
  • 4
    John_Xelonas

    0
  • See all

Description & Specifications

Connect more devices: Quadruple capacity with OFDMA and MU-MIMO technology for simultaneous transmission to more devices. Enhanced seamless coverage: Ensure seamless coverage of the entire home with a cleaner and stronger Wi-Fi signal produced by Wi-Fi 6.

Manufacturer

Manufacturer Details

Warnings & Safety Information

Technical Specifications

Frequency
Dual Band (2.4 & 5GHz)

Frequency

The frequencies at which the Access Point can transmit.
2. Additional frequencies allow for greater speed on more devices.

Dual Band (2.4 & 5GHz)
They transmit signals on two frequencies. They offer higher speeds compared to single and connect more devices. The 2.4Ghz frequency is the most common and, as it has a large range, is usually congested by neighboring Wi-Fi signals, making communication between devices more difficult. The 5Ghz provides higher speeds than the 2.4Ghz but is more sensitive to obstacles (e.g. walls) that reduce its range. This difference, as well as its more limited use, helps to have fewer interferences from other networks.
Maximum WLAN Speed
3000 Mbps

Maximum WLAN Speed

Theoretical maximum speed with one wirelessly connected device, mainly used for marketing purposes. The speed that each connected device will have depends on the distance, obstacles, how many other devices are connected, how many other networks exist in the same area, etc.
Wi-Fi Generation
Wi‑Fi 6

Wi-Fi Generation

Wi‑Fi 6

The most advanced Wi-Fi standard, offering speeds up to 40% faster than Wi-Fi 5, coordinates communication with connected devices to consume less battery, and works better in environments with many Wi-Fi devices.

Ideal for homes with many smart devices.

Compatible with all previous generations.
IEEE Networking Standards
802.11a, 802.11 b/g/n, 802.11ac, 802.11ax
LAN speed
1000 Mbps
Wi-Fi Mesh Network
Yes

Wi-Fi Mesh Network

Technology that allows the creation of a unified, flexible network where multiple Access Points work together to provide broader and more stable Wi-Fi coverage. Ideal for large homes, offices, and businesses.
Ethernet Backhaul
No

Ethernet Backhaul

The wired connection between access points using an Ethernet cable, so that their communication does not burden the wireless network. It offers greater stability, higher speeds, and better coverage compared to wireless backhaul.

General Characteristics

Placement
Indoor
Ethernet Ports
3

Ethernet Ports

Wired connection capability through an Ethernet network port. It allows connection via Ethernet cable, ensuring a stable and reliable connection, high data transfer speeds, and reduced interference compared to Wi-Fi.
Packaging
Single Kit

Installation Type

Ceiling
No

Ceiling

Ceiling installation for uniform coverage of the area from above. Ideal for offices, shops, and professional spaces.
Wall
No

Wall

Wall mounting for targeted coverage of specific areas or rooms. Suitable for more flexible installations.
Board games
Yes

Board games

Placement on a surface (e.g. desk or shelf) without permanent installation. Ideal for easy use and quick setup.

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

Reviews (7)

4.7
7
4.7
Review this product
  1. 5
  2. 2
  3. 3 stars
    0
  4. 2 stars
    0
  5. 1 star
    0
Review this product
  • Operational stability
  • Ease of installation
  • Speed
  • Range
  • Value for money
  • a3_mike
    5
    a3_mike

    Verified purchase

    The X-20 replaced an M4R, as well as the provider's 4G router, giving me full remote management capability. It works perfectly with the other Decos in the setup (1 M4R, 1 M5, and one M3W). The only note is that if you select Ethernet Backhaul via a switch with loop detection functionality (e.g., TL-SG105), it should be disabled as the X20 creates a momentary loop during reboot, causing the switch to block the port.

    Translated from Greek ·
    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
    Did you find this review helpful?
  • ecobriq
    5
    1 out of 1 members found this review helpful
    ecobriq

    Verified purchase

    Very easy to install, very easy to set up, enjoyable application. We use it as a mobile router. So far, we haven't had any issues.

    Translated from Greek ·
    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
    Did you find this review helpful?
  • 5
    fanisvalvis

    Verified purchase

    This review is about the network version: v2

  • 5
    akis_k

    Verified purchase

  • 4
    John_Xelonas

    Verified purchase

    • Operational stability
    • Ease of installation
    • Range
    • Speed
    • Value for money
  • 4
    Panagiotis_Bisarakis

    Verified purchase

    • Operational stability
    • Speed
    • Ease of installation
    • Range
    • Value for money
  • 5
    Athanasios_Vellios

    Verified purchase

    • Operational stability
    • Ease of installation
    • Speed
    • Range
    • Value for money
  • a3_mike
    5
    a3_mike

    The X-20 replaced an M4R, as well as the provider's 4G router, giving me full remote management capability. It works perfectly with the other Decos in the setup (1 M4R, 1 M5, and one M3W). The only note is that if you select Ethernet Backhaul via a switch with loop detection functionality (e.g., TL-SG105), it should be disabled as the X20 creates a momentary loop during reboot, causing the switch to block the port.

    Translated from Greek ·
    0
  • ecobriq
    5
    ecobriq

    Very easy to install, very easy to set up, enjoyable application. We use it as a mobile router. So far, we haven't had any issues.

    Translated from Greek ·
    1
  • 5
    fanisvalvis

    0
  • 5
    akis_k

    0
  • 4
    John_Xelonas

    0
  • See all
165,00 €
14,00 €   shipping cost