The Orvaldi 450LED UPS uses line-interactive technology and microprocessor control, with a power rating of 450 VA and 240 W. AVR Boost and Buck functions regulate the voltage, while the cold start function allows the UPS to start without a mains connection.
The output waveform is simulated sine wave, and the typical transfer time is 2–4 ms. It features self-testing, a smart charger, and LED indicators for operating status, load and battery levels, input and output voltages, as well as overload, fault, and low battery warnings.
- Type: Line-interactive (VI)
- Form factor: Tower
- Power rating: 450 VA / 240 W
- AC outlets: 2 Schuko
- Output waveform: Simulated sine wave
- Input voltage: 220/230/240 VAC
- Input voltage range: 162–290 VAC
- Frequency: 50/60 Hz with automatic adjustment
- Voltage regulation in battery mode: ±10%
- Frequency regulation: 50/60 Hz ±1 Hz
- Transfer time: Typically 2–4 ms
- Battery: 12 V / 4.5 Ah
- Recharge time: 4–6 hours to 90%
- Protections: Overload, deep discharge, and overcharge
- Alarms: Every 10 seconds in emergency mode, every second for low battery, every 0.5 seconds for overload, every 2 seconds when the battery needs replacing, and continuous in the event of a fault
- Cold start function: Yes
- Display: LED indicators
- Dimensions: 287 × 100 × 142 mm
- Net weight: 3.55 kg
- Operating humidity: 0–90% RH at 0–40 °C, non-condensing
- Noise level: Below 40 dB
Dimensions
- Type
- (VI) Line-Interactive
- Power (VA)
- 450 VA
- Power (Watt)
- 240 W
- Size
- Tower
- Output Waveform
- Modified Sine Wave,Modified sinewave
- Display Screen
- LED Indicators
Connectivity
- USB
- No
- AC outlets
- 2
- Plug Type
- Schuko
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.