Skroutz.eu

Total Total Rotary Hammer Percussion Drill Brushless 20V 2x4Ah with SDS Plus Socket
Rotary Hammers

Total Total Rotary Hammer Percussion Drill Brushless 20V 2x4Ah with SDS Plus Socket

Key features:

  • Voltage: 20V
  • Impact Energy: 1.5J
  • No Load Speed: 0-1,350 rpm
  • Impacts: 0-4,700 bpm
See full description

Top specs

  • Item Excavator

  • Impact Energy

    The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

    2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.

    1.5

    For casual amateur use, 2 to 4 Joules are considered sufficient.

  • Socket

    SDS - SDS Plus (TE-C)

    SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.

  • Speed Setting

    1

    Ability to control the rotation speed, either through the trigger or via a speed selector.

  • Maximum Number of Impacts

    The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

    2.

    Note that the Impact Energy is also important for performance, indicating the force of each strike.

  • Volt

    The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

    2. Impact energy is another characteristic that shows the "strength" of the tool.

    20

    Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
  • See all

User Manual

Learn more about invoicing
Review the product
Product report

Description

Description

Technical Specifications

  • Voltage: 20V
  • No-load speed: 0-1350 rpm
  • Impact rate: 0-4700 bpm
  • Single impact energy: 1.5J
  • Maximum drilling capacity: Φ22 in concrete
  • Charging voltage: 220V-240V ~ 50/60Hz

Technical Specifications

  • Maximum drilling capacity in concrete: 22 mm
  • SDS plus chuck system
  • 2 batteries 20V / 4Ah
  • 20V fast charger
  • Canvas carrying bag
  • 3 drill bits
  • Chisel

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Product Guides

User Manual

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
2
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Ah
4 Ah

Ah

The battery capacity. The higher the number, the longer the tool's operating time.
2.
An average continuous working time is 20-25 minutes per Ah, but it always depends on the type of work we are doing.
Lithium
Yes

Drilling Features

Cement Ø
22 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1350 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
1.5 Joule

Impact Energy: 1.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4700 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
Yes

Pneumatic


With a pneumatic impact mechanism, which relies on air or pressure and makes the tool more efficient in demanding applications.
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No
Anti-Vibration System
No

Anti-Vibration System

The anti-vibration system limits the transfer of vibrations from the motor/impact mechanism to the handle, improving comfort and reducing fatigue during long hours of work. It is especially useful for concrete drilling or demolition tasks. It does not necessarily increase power, but it improves control and ergonomics.

Additional Features

Carrying Case
Soft Case
Handle included
Yes
Integrated Light
No
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

Technical Specifications

  • Voltage: 20V
  • No-load speed: 0-1350 rpm
  • Impact rate: 0-4700 bpm
  • Single impact energy: 1.5J
  • Maximum drilling capacity: Φ22 in concrete
  • Charging voltage: 220V-240V ~ 50/60Hz

Technical Specifications

  • Maximum drilling capacity in concrete: 22 mm
  • SDS plus chuck system
  • 2 batteries 20V / 4Ah
  • 20V fast charger
  • Canvas carrying bag
  • 3 drill bits
  • Chisel

Manufacturer

Manufacturer Details

Warnings & Safety Information

Product Guides

User Manual

Product Details

Power Source
Battery
Type
Excavator

Battery Specifications

Number of Batteries
2
Volt
20 V

Volt: 20

The higher the tool's voltage, the more powerful it becomes and performs tasks more easily, however, higher voltage usually means an increase in weight.

2. Impact energy is another characteristic that shows the "strength" of the tool.


Tools that are 18 volts and above are considered high power and their strength is sufficient even for professional work.
Ah
4 Ah

Ah

The battery capacity. The higher the number, the longer the tool's operating time.
2.
An average continuous working time is 20-25 minutes per Ah, but it always depends on the type of work we are doing.
Lithium
Yes

Drilling Features

Cement Ø
22 mm

Cement Ø

The maximum possible drilling diameter in concrete.

Features

Maximum Motor Speed
1350 rpm

Maximum Motor Speed

The faster the machine's speed, the easier it is to drill into harder surfaces.
Impact Energy
1.5 Joule

Impact Energy: 1.5

The impact force shows how powerful the tool is. The more Joules, the stronger the hits.

2. Specifically for demolition tools with frequent and heavy use, at least 20 Joules are recommended.


For casual amateur use, 2 to 4 Joules are considered sufficient.
Maximum Number of Impacts
4700 bpm

Maximum Number of Impacts

The number of strikes that the machine can deliver in one minute. Generally, the higher the number, the easier the work on harder surfaces.

2.

Note that the Impact Energy is also important for performance, indicating the force of each strike.
Jam Protection
No
Socket
SDS - SDS Plus (TE-C)

Socket

SDS - SDS Plus (TE-C)

SDS sockets have better performance in rotary hammer functions compared to others and are suitable for working on concrete or stone. They are also easy to change drill bits, which can be done with one hand. 2. SDS-Plus (TE-C) sockets have a base diameter of 10 mm and can accept drill bit diameters between 4-30 mm. These sockets are only compatible with corresponding SDS Plus drills.
Brushless
Yes

Brushless


It features a brushless motor that generates less heat and friction, resulting in less wear on the motor and longer battery life.
Pneumatic
Yes

Pneumatic


With a pneumatic impact mechanism, which relies on air or pressure and makes the tool more efficient in demanding applications.
Speed Adjustable
Yes

Speed Adjustable


Ability to control the rotation speed, either through the trigger or via a speed selector.
Impact
Yes
Rotary
Yes
Screwing/Unscrewing
No
Anti-Vibration System
No

Anti-Vibration System

The anti-vibration system limits the transfer of vibrations from the motor/impact mechanism to the handle, improving comfort and reducing fatigue during long hours of work. It is especially useful for concrete drilling or demolition tasks. It does not necessarily increase power, but it improves control and ergonomics.

Additional Features

Carrying Case
Soft Case
Handle included
Yes
Integrated Light
No
Guide
No

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

187,00 €
14,00 €   shipping cost