The MotionCam Outdoor Jeweller is an advanced wireless outdoor motion detector equipped with a camera for photographic alarm verification. It detects intrusion from the first steps and confirms it with a series of photos, reducing false alarms for users and unnecessary patrols by security companies.
Advanced Wireless Motion Detector
The MotionCam Outdoor Jeweller is an advanced wireless outdoor motion detector equipped with a camera for photographic alarm verification. It detects intrusion from the first steps and confirms it with a series of photos, reducing false alarms for users and unnecessary patrols by security companies.
With 2 Independent PIR Sensors
The device features two independent PIR sensors with signal processing through the LISA algorithm, which performs correlation and spectrum analysis to distinguish real threats from interference. The MotionCam Outdoor detects pets up to 80 cm in height and can detect motion at a distance of 3–15 meters, with a horizontal field of view of 90° and a movement speed of 0.3–2.0 m/s.
Camera for Photographic Confirmation
The device's camera provides photographic confirmation with a resolution of up to 640 x 352 px, featuring a horizontal field of view of 105° and a vertical field of 50°, and IR backlight for shooting in low light or at night. Photos can be taken by alarm, scenario, schedule, during arming/disarming, or upon user request, with a delivery time of 9–20 seconds depending on the resolution.
Multi-level Tamper Protection
The MotionCam Outdoor features multi-level sabotage protection, including an anti-masking system and alerts for detachment or removal of the detector. Communication is carried out through the secure Jeweller and Wings protocols, with dual transmission methods, encryption, and frequency hopping, ensuring reliable transmission even with weak signals or communication interruptions.
Easy installation
The installation is quick and easy via a QR code in the Ajax app, where the device can be configured in real time and the detection zones and communication can be checked. It is powered by 4 pre-installed CR123A batteries, with a lifespan of up to 3 years, while the IP55 enclosure provides protection against water and dust, and the device operates at temperatures from −25°C to +60°C.
Features
- Supports Jeweller and Wings communication
- Two PIR sensors
- Motion detection 3–15 m
- Horizontal field 90°
- Camera resolution up to 640 × 352 px
- Camera horizontal field 105°
- Camera vertical field 50°
- IR backlight for night shooting
- Photo series 1–5 per alarm
- Photo delivery time 9–20 seconds
- Three sensitivity levels
- Pet immunity up to 80 cm
- Resolution and photos adjustable via app
- Anti-masking and tampering alarm
- Notifications for communication loss
- Device authentication
- Powered by 4 × CR123A, pre-installed
- Battery life up to 3 years
- Operating voltage 3.8–6.2 V, nominal 6 V
- Quiescent current 23 μA, maximum 906 mA
- Battery capacity 3,200 mAh
- Low battery voltage 4.65 V
- Low voltage recovery 5 V
- End-of-life battery voltage 3.8 V
- End-of-life capacity 500 mAh
- Manufacturer Huiderui or Panasonic
- Dimensions 206 × 108 × 93 mm
- Weight 470 g
- Operating temperature −25°C to +60°C
- Humidity up to 95%
- Protection IP55
Specifications
- Detection Type
- Infrared
- Detection Angle
- 105 °
- Protection Certification
- IP55
- Scope
- 15 m
- Connector
- Wireless
- Battery
- Yes
Additional Features
- Antimasking
- Yes
- Tamper
- Yes
- Curtain
- No
- Placement
- Wall
- Recessed
- No
- PET
- Yes
- Built-in Camera
- Yes
Smart Attributes
- Connectivity
- -
Important information
Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.