Description: NoiseLIQUIDator (shock absorption) - Anticorrosive two-component shock absorption mastic. A new generation material based on oligomers with specifically targeted additives.

Reduces cabin noise level from operational noise: water, mud, sandblasting and gravel, wheel noise, suspension operation.

Installation conditions:

• The surface must first be cleaned, degreased, and dried.
• To prepare the working composition, add component B to the main component A and mix with a mixer for 5 minutes until it softens.
• Provide access to the working surface with a lift, inspection pit, or jack, or remove the wheel.
• Apply a 2 mm layer of mastic with a spatula.
• One container is sufficient for processing one arch.

Attention! Working time with mastic - no more than 40 minutes! The mastic hardens within 24 hours. Maximum shock absorption value appears after 7 days. Work can be carried out at temperatures from +10°C to +40°C.

Safety rules: It is recommended to work with gloves and protect the eyes with special glasses, preferably using a respirator. Avoid contact with clothes and the outer surface of the body - the mastic is difficult to wash off from any surface. The room should be well ventilated.