Skroutz.eu

Mapei Σοβάς Plaster Fillers Mortar for Concrete Repair 25kg 25kg
Plaster Fillers

Mapei Σοβάς Plaster Fillers Mortar for Concrete Repair 25kg 25kg

  • Mapegrout Thixotropic is used in all concrete repair works such as reconstruction of reinforcement cover, repair of beam edges, columns, and balcony edges that have been damaged due to the oxidation...
  • Mapegrout Thixotropic is used in all concrete repair works such as reconstruction of reinforcement cover, repair of beam edges, columns, and balcony edges that have been damaged due to the oxidation of their reinforcement.
  • Thanks to its high mechanical strength, it can be used for repairs on load-bearing reinforcement. Made from cement binders,...
See full description See full description
Review the product
Product report

Description

Description

  • Mapegrout Thixotropic is used in all concrete repair works such as reconstruction of reinforcement cover, repair of beam edges, columns, and balcony edges that have been damaged due to the oxidation of their reinforcement.
  • Thanks to its high mechanical strength, it can be used for repairs on load-bearing reinforcement. Made from cement binders, granulometrically graded aggregates, special additives, and synthetic fibers, it is prepared by mixing a 25 kg bag with 3.8-4.1 liters of water.
  • Mapegrout Thixotropic is applied with a spatula, trowel, or spray on solid substrates that must be clean, have a rough surface, and have been previously moistened with water. It repairs surfaces up to 30-35 mm thick in a single layer without formwork.
  • For better curing of the material and greater reduction of shrinkage, it can be mixed with the curing agent Mapecure SRA, at a ratio of 0.25% by weight.

Manufacturer

Manufacturer Details

Warnings & Safety Information
See full description

Specifications

Specifications

Fast-setting
No
Fiber-reinforced
Yes
Resin-based
No
Acrylic
No
Water-repellent
No
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

See all specifications

Description & Specifications

  • Mapegrout Thixotropic is used in all concrete repair works such as reconstruction of reinforcement cover, repair of beam edges, columns, and balcony edges that have been damaged due to the oxidation of their reinforcement.
  • Thanks to its high mechanical strength, it can be used for repairs on load-bearing reinforcement. Made from cement binders, granulometrically graded aggregates, special additives, and synthetic fibers, it is prepared by mixing a 25 kg bag with 3.8-4.1 liters of water.
  • Mapegrout Thixotropic is applied with a spatula, trowel, or spray on solid substrates that must be clean, have a rough surface, and have been previously moistened with water. It repairs surfaces up to 30-35 mm thick in a single layer without formwork.
  • For better curing of the material and greater reduction of shrinkage, it can be mixed with the curing agent Mapecure SRA, at a ratio of 0.25% by weight.

Manufacturer

Manufacturer Details

Warnings & Safety Information
Fast-setting
No
Fiber-reinforced
Yes
Resin-based
No
Acrylic
No
Water-repellent
No
Weight
25 kg

Important information

Specifications are collected from official manufacturer websites. Please verify the specifications before proceeding with your final purchase. If you notice any problem you can report it here.

13,13 €
74,00 €   shipping cost