• Hot water in seconds
• Absolutely safe to use
• Equipped with all necessary electrical protections
• Maximum water temperature 60° C
• 40 ºC with a flow rate of 1.5 liters / minute
• Heating element power: 2 kW first stage / 3 kW second stage
• Heating element operation mode: one heating element (separately 2 kW or 3 kW) / two heating elements (simultaneously 5 kW)
• The operation of each heating element is indicated by an LED on the corresponding control button
• Protection rating: IP 54
• No need for central heating or water heater
• Operating pressure: 0.4 - 0.6 MPa (0.4 - 6 bar)
• Instantly get exactly as much hot water as you need
• Precise adjustment of water temperature and pressure
• No water or energy losses
• Beautiful design for the kitchen, bathroom, cottage
• The water heating circuit is made of approved components (non-corrosive and non-toxic)
• Easy and quick installation
• Power: 5000W

The instant water heater is a type of water heater that heats water in real-time. It heats only the water that passes through it at that moment. There is no hot water storage tank. This has many advantages, such as energy savings, since only the water that is used is heated, and longer lifespan, as there is no water tank and no accumulation of salts in the resistance and other components.

It operates with electricity and is single-phase.

The instant water heater has a cold water inlet pipe, which passes through the heating element, gets heated, and exits through the hot water outlet pipe. A necessary condition for the instant water heater to initially operate is the pressure of the cold water inlet must not be too low.

The water temperature is regulated by a thermostat, so it does not exceed a maximum value. The temperatures that the hot water reaches are pre-set so that one can use the hot water directly, without needing to mix it with cold water.

The maximum temperature it can reach for hot water production is 60 °C, while the maximum water flow rate reaches up to 1.5 liters per minute. Indicatively, 38-42 °C degrees are standard for shower use.

• It is small in size and doesn't take up much space.
• There are no energy losses since only the water being used at that moment is heated. Therefore, we save on the electricity bill. In a classic water heater, the hot water that is not used goes to waste.
• The hot water used in the instant water heater is used as is, without mixing with cold water, as happens in the classic water heater. This way, we save water in addition to electricity.
• There is no need to wait for the water to heat up. As soon as we turn on the tap, hot water runs in a few seconds. The classic water heater takes a few minutes, depending on its size.
• The hot water never runs out. As long as we have the tap open, we will have hot water.